TV Mount for Redhawk 26XD

[kimngreg]

We're planning to install a TV in the bedroom area of our 26XD. There is already an outlet and cable hookup on the upper bedroom wall. We not sure how to mount the TV. Is the wall already reinforced enough to use a regular TV wall mount? Do we need a special mount, or need to somehow reinforce the wall? Thanks for any ideas!

[corky111111]

I had the same question about the bedroom TV wall support for our 29XK
Contact Jayco via their contacts page with your unit serial number and ask them for the drawing of that wall.
Here's the link

Contact Customer Service | Jayco, Inc.

They were kind enough to email me the drawing of the wall in question in a pdf format. Shows right where the reinforcement
block is, including measurements.

[cschiller]

We just put one in our 2016 23XM bedroom using their supplied build diagram.
Perfect install and good info to have. Jayco also sent me a full set of wiring diagrams as requested. Kudos to their support team!

[Wildhorses24]

Originally Posted by kimngreg

We're planning to install a TV in the bedroom area of our 26XD. There is already an outlet and cable hookup on the upper bedroom wall. We not sure how to mount the TV. Is the wall already reinforced enough to use a regular TV wall mount? Do we need a special mount, or need to somehow reinforce the wall? Thanks for any ideas!

Yes, we have a small tv in the back bed area on our 26xd. I'll try and remember to snap a photo and post measurements on Wednesday before we take off.

[kimngreg]

Thanks for the replies. Jayco just sent us a diagram of wall so hopefully we can get our tv mounted now!

[kimngreg]

Did the bracket mount pretty secure? We just got the wall diagram from Jayco. The wall between the bedroom and bath looks like it has a 1 x 3 board. Just curious if that's where you put your t.v.