Undercarriage Sewer Storage (cont.)
This is a variation of the sewage storage designs I have seen on this and other RV forums. Thanks to all who post their ideas!
All parts purchased from Lowes or Home Depot.
I used a 5"x5" plastic fence post cut to extend about 2" beyond the frame rail on the curb side of the trailer and about 7 inches beyond the frame rail on the street (sewage dump) side of the trailer.
The street side end is covered with a 5"x5" fence post cap secured with 2 stainless steel screws.
The post is bolted through the outside leg of the trailer frame rail with (2) 3/8"x1 1/2" bolts, (2) fender washers, (2) 3/8"x3/8" rubber bushings and (2) lock nuts on each end of post.
The drawer is a section of plastic gutter with varnished maple end caps and spacer held in place with 3 wood screws and a plastic drawer pull on the end.
The street side cap is secured with a bungee cord (see photo).
All totaled this mod cost about $60 and took about 3 hours (engineering as I go).
2016 Starcraft Launch Ultralite 26 BHS W/ProSeries WDH
2013 Ford F-150 Supercrew 5.0L W/factory tow package