Jayco RV Owners Forum

Thread Tools Display Modes
Old 10-25-2015, 04:46 PM   #1
Junior Member
Join Date: Oct 2015
Location: Detroit
Posts: 1
1996 era manual crank handle

Hello Everyone

I have a 1996 Jayco 3310 RLSS 5th wheel with 2 slides. The smaller one (bedroom slide) works great, the large living room slide is another matter. In order to get it retracted so I can get it home to work on it I need to crank it in. The problem is I don't have a crank handle and I can't seem to find one anywhere. Jayco no longer stocks the tool and every dealer says basically the same thing, "Sorry, I can't help you" followed by, "I'll sell you a new motor and remote manual drive (now a hex) for $$$$$...

The manual drive opening on the opposite the slide of the trailer has a "D" section rod that I assume I'd fit the crank over and wind it in.

Does anyone know of a source for this crank handle or an alternate means to get the slide retracted? And before you ask, I've trouble shot the electric system, motor, etc... I need the tool to crank it in.

Thanks in advance for your help

OSHJayco is offline   Reply With Quote
Old 10-25-2015, 05:00 PM   #2
Senior Member
Join Date: May 2015
Location: Dixon
Posts: 291
If you lived near here is recommend a friend who has a blacksmiths shop. That said I'd look for a blacksmith, there are a few who do it as a hobby that might be able to fabricate one for you.
CKinsella is offline   Reply With Quote

crank handle, old style tools, vintage jayco tool

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 08:02 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.