 |
01-28-2011, 10:14 AM
|
#1
|
|
Junior Member
Join Date: Jan 2011
Location: Nation Wide
Posts: 25
|
2011 Pinnacle FW B1RB
Any one out there having any issues with their convention oven /range oven combo exhaust... It seems that Jayco has install a dummy exhaust hole... this means that any fumes/smoke from cooking on your range oven are actually not exhaust out through the provide hood vent; IT's BLOCKED ... the exhaust hole that the convention/microwave oven has on the back is on the left hand corner and the dummy hole is right in the middle of the wall - way of , why I don't know , they did not give a specific reason for this other than to use the roof vent to aid with condensation , smoke and/or fumes.. by using the roof vent you lose your cool or warm environment depending on the season!!!!!... Watch out new buyers.. If anyone contacted jayco please share your experience on this matter....
__________________
Adame
|
|
|
|
01-28-2011, 10:26 AM
|
#2
|
|
Senior Member
Join Date: Nov 2010
Location: Arkansas
Posts: 224
|
Do you have it opened outside? There is a flapper dood outside the camper that needs to be unlatched.
__________________
Stephen & Lori
Jordan (Our daughter)
Kitty & Elmore (Our 2 dumped cats)
Adopt a shelter pet!
2009 Jayco Designer 37RLQS
2011 GMC Denali 3500 Duramax Crew Cab 4X4 Dually
20K Curt Q5 hitch
|
|
|
|
|
01-28-2011, 10:27 AM
|
#3
|
|
Senior Member
Join Date: Nov 2010
Location: Arkansas
Posts: 224
|
It will be on the side of the camper that the stove is on.
__________________
Stephen & Lori
Jordan (Our daughter)
Kitty & Elmore (Our 2 dumped cats)
Adopt a shelter pet!
2009 Jayco Designer 37RLQS
2011 GMC Denali 3500 Duramax Crew Cab 4X4 Dually
20K Curt Q5 hitch
|
|
|
|
|
01-28-2011, 10:55 AM
|
#4
|
|
Senior Member
Join Date: Jul 2009
Location: Mostly the US
Posts: 10,002
|
Welcome to the Jayco Owners Forum Adame! Hope your vent issue resolves itself 
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
|
|
|
|
|
01-28-2011, 11:43 AM
|
#5
|
|
Junior Member
Join Date: Jan 2011
Location: Nation Wide
Posts: 25
|
yes... that's what triggered me to calla mobile Rv service guy in and take a look... We took the microwave down from it's place and saw the the outlets vent hole don't match in angle... Jayco even said that vent hole was just there a dummy vent... apparently this model , at the beginning, was selling an either or option -either you got the convention oven/microwave or the range oven w /microwave only combo... the only explanation is that this a screw up engineer designed... and since I assume all this walls are pre-fabricated by 1000s they just let the client suffer for it ...
__________________
Adame
|
|
|
|
|
01-28-2011, 11:45 AM
|
#6
|
|
Junior Member
Join Date: Jan 2011
Location: Nation Wide
Posts: 25
|
the hole are not a-line to each other , there completely of
__________________
Adame
|
|
|
|
|
01-28-2011, 11:46 AM
|
#7
|
|
Junior Member
Join Date: Jan 2011
Location: Nation Wide
Posts: 25
|
sorry I meant Holes ; there not a line to each other
__________________
Adame
|
|
|
|
|
02-02-2011, 09:41 PM
|
#8
|
|
Junior Member
Join Date: Jul 2010
Location: Portland, Oregon
Posts: 21
|
I have the Jayco Designer 35RLSA...it has the same 1/2 time Oven(convection oven) and microwave. AS my Designer is out of warranty I did a modification to it....took down the microwave/oven and marked on the wall what needed to be cut/ground out...ground it out...put up some new heat tape to cover what was newly exposed..had to change the vent exhaust shield...(mine easily reversed)...reattached the microwave and now it vents to the outside...
I will admit the air flow is alittle reduced but it still exhausts to the outside....just like it is suppose to. I saw this modification on modmyrv.com....step by step instructions.
Total time for the modification(and I am not a Handyman by trade) was about 3 hours.
Hope that helps!!! Good luck.
__________________
"Can't wait to have more fun"
2007 Dodge 3500 Dually
2008 Jayco 35RLSA
|
|
|
|
|
02-02-2011, 10:49 PM
|
#9
|
|
Senior Member
Join Date: Oct 2010
Location: West Texas
Posts: 2,114
|
Well, you got me to wondering....mine appears to be working right but I think I will peer into my vent to see if it is lined up or a little off. Strange.
__________________
Dan
2016 Chevy LTZ - Duramax/Allison
2008 Eagle 30.5BHS
|
|
|
|
|
02-03-2011, 07:26 AM
|
#10
|
|
Senior Member
Join Date: Jan 2011
Location: Vienna
Posts: 2,044
|
Thanks for the info on that site. Any mod you want to do to your rv is probably listed there. mymodrv.com I was not aware of that site so now I can do some looking around.
__________________
Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
|
|
|
|
|
02-03-2011, 08:55 AM
|
#11
|
|
Senior Member
Join Date: Jul 2009
Location: Mostly the US
Posts: 10,002
|
Quote:
Originally Posted by namusmc65
Thanks for the info on that site. Any mod you want to do to your rv is probably listed there. mymodrv.com I was not aware of that site so now I can do some looking around.
|
Try modmyrv.com
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
|
|
|
|
|
02-03-2011, 04:17 PM
|
#12
|
|
Senior Member
Join Date: Jan 2011
Location: Vienna
Posts: 2,044
|
OOPS! Busted! lol
__________________
Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
|
|
|
|
|
02-04-2011, 07:38 AM
|
#13
|
|
Junior Member
Join Date: Jan 2011
Location: Nation Wide
Posts: 25
|
thanks
__________________
Adame
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
