29.5 Awing Light (Weird) Issue
OK, I now have a new weird issue. While camping over the weekend, the awing light went out for no reason. I wasn’t at the site, so the DW tried a few things. The light was turned-on by the switch and I ‘had’ the LED dimmer module installed so I could dim the awing light. She tired the switch, nothing happened, then she hit the light button on the Linc Remote and it came back on.
Now when I got back she tells me about it. When it was time for bed, the light switch wouldn’t turn off the light. Then I used the Linc Remote light button and it worked. BUT, I also just happened to notice that the light over the stove went out, as well as the hot water heater. The water heater was on using electricity and the red light was lit before I used the remote, so that’s how I noticed it went out. I tried many combinations using the switch, Linc remote and the remote for the LED dimmer module. Thinking that the LED dimmer module was bad, I just removed it (at midnight). Still got the same results. The only way to turn off the light was to have the switch in the Off position and use the Linc Remote. If the switch is on & I use the remote, the light does not go out until the switch is down. If the switch is down & I use the remote the light does not come on, although I do hear the remote Module (somewhere inside the panel) click when using the remote. I even tried using the hot water heater on propane, but I still get the same results. When the awing light goes out, so does the one over the stove & the hot water heater, even in propane mode. BTW, I did try to unplug shore power and shut off power using the battery disconnect switch. This is not fix or reset the problem.
So I’m guessing there is something wrong with the module that the Linc remote controls. But not sure why its affecting the water heater or the light over the stove. I did verify that the fridge still worked using propane when the swing light is off. Not sure what ‘other’ 12v system(s) this maybe affecting. Has anyone had anything like this before? I’ve been inside the mater control panel once and really don’t want to go back in there. It’s a Major Rats nest of wiring. I still haven’t yet tried to see if when the light is off and I have no shore power, can I still control the slides?
I’ve also been inside the panel behind the false-wall in the cabinet (behind the master control panel). This is where I think the module that works with the Linc’s remote is located. There are fuses & modules in this panel.
I have a few more trips planned this year and don't want to drop it off for service right now. Besides the wait, I didn't buy my 5'er local, so I'm sure I'll be Last on their list of customers to service.
Dave...
Dave...
__________________
2015 Ram 3500, CTD, CCLB Dually, Aisin, 4x4 in Maximum Steel, Andersen Ultimate Hitch (v2)
2013 Ram 2500, CTD, CCLB 4x4 in True Blue - SOLD
2016 Eagle HT 29.5 BHDS Picked-up 4/1/16
2007 Rockwood ROO 21SS - SOLD
|