6 point 2.0 lippert leveling won't lower middle jacks

[harvey_009]

2015 38flsa middle jacks always worked till the last time. They only came down a little. How do you manually put them down? I tried version 3 way but doesn't work. Thanks for any help anyone can give.

[tularockstar]

Are you seeing any error message on the control panel? If so, please include a picture.

Originally Posted by harvey_009

2015 38flsa middle jacks always worked till the last time. They only came down a little. How do you manually put them down? I tried version 3 way but doesn't work. Thanks for any help anyone can give.

[harvey_009]

Said error feature disabled then says must hit enter to resolve. I just didn't understand why they won't go down with auto level.

[TexasRT]

As far as I know, on the 2.0 system there is no way to manually lower the center stabilizer jacks. Are the rear jacks grounding correctly? I recently had a problem with the rears and stabilizers not grounding proper, ended up being a faulty rear leveling sensor. It's mounted to the frame inside the underbelly just in front of the spare tire.

[harvey_009]

Ok cool thanks cause I just found out that they wasn't going all the way down on auto level either and had to put them down. I'll be checking for that sensor then. Thanks very much !

[skijlw]

If your leveling board is not showing an error you may need to cause an error for the middle levelers so you can do a re-calibration per your manual. To cause the error turn off power and unplug the wires that go to the middle legs at the control board. turn on power, get the error, turn off power and plug the legs back in. Restore power and try a re-calibration.