Originally Posted by Aero_Dave
OK, this sounds interesting. Details please!
RE: Dimmer on 29.5 BHDS
I have to admit, I was very leery about ordering and doing this at first but this was one of the easiest mods so far on my Jayco 29.5.
I ordered the "inline dimmer and remote" seen in the pics from Amazon similar to this one shown here (not sure if this is where i got it!?): Robot Check
I am pretty sure it came from China as it took 4-5 week to receive it.
Installed it on the wires just under the plastic cover plate under the awning arms going up the side wall, outside, of 5th Wheel (see pics). Sealed up the wires and inline with some caulk, replaced the plate and Bob is now your uncle! (PS- Make sure if you do this mod to install the wires in the right directions marked on the "inline")
Note: This might not be the best solution for a dimmer as you still need the remote to dim the lights but it remembers the last setting you used and was by far the easiest (and probably cheapest) that i have seen!
PS - Apologies for hijacking this post but figured since a few have asked