We have had our 2016 since the 15th of this month (so 11 days) and there were a lot of things that were missed by our dealer during PDI. Most of them were cosmetic (missing light covers, crack in pantry door, slice in vinyl ceiling, missing trim on slide, screw sticking out between door frame and wall etc.) and not a huge deal but there were a few that have cost us a bit more time and one that has actually created a larger problem for us.
The first is that the central vacuum was not installed correctly and was unusable. Those huge screws? Not supposed to be there. They get in the way of being able to put the vacuum bag on to that tube. The dealer had to remove the vacuum and find new screws to fit and then reinstall. This was not something anyone thought to check because the vacuum bag goes on the inside of the part that is in the basement.
Also, we seem to have an issues with our speakers. 50% of them have no sound coming from them so definitely check A, B & C and don't just assume they are all working if you hear sound - go and stand under each one. Half of mine work in each area.
One of our slides was wonky but that was an easy adjustment.
However, the biggest issue was that the caulking job on the shower was incomplete. 1/3 of the outside bottom of where the shower door tracks meet the fibreglass enclosure had zero silicone. The entire length inside of the tracks had zero silicone. So water was seeping out from under the tracks. Unfortunately this was not discovered until 4 showers had been had and there is now water damage as a result of it. Please check the caulking on yours because I would hate for this to happen to anyone else.
It just stops 2/3rds of the way across.
Congratulations on your Pinnacle! Except for the issues we have had we love everything else about it. We went with the RSQS with a queen bed.