|
11-17-2011, 09:24 PM
|
#1
|
Senior Member
Join Date: May 2011
Location: Marrero,la
Posts: 158
|
bike racks
I have an 321RLTS Jayco Eagle. What is the best bike rack for this unit. On the back carrier it only has one bar standing vertical and my ole mind is at withs end on what type of bike rack to use.
thanks.
__________________
Randy T
Marrero,La
2011 Jayco Eagle 321RLTS FW
2012 Dodge 3500
US Govt survey shows three out of four people make up 75% of the total population
|
|
|
11-17-2011, 10:46 PM
|
#2
|
Senior Member
Join Date: Oct 2009
Location: Calgary
Posts: 524
|
It is not recommended to put a bike rack on the rear bumper of our 5th wheels. It is not strong enough unless it has been beefed up. I found out the hard way on my old 5th wheel.
I would suggest putting a front bumper hitch on your truck. I had one on my 07 Dodge Ram and am now going to purchase a Curt front bumper hitch for my 2010 Dodge Ram from the Hitch Store who have great prices and free delivery.
__________________
2007 Jayco Eagle 325BHS
2010 Dodge 3500 Laramie
Kipor 2000 Generator
|
|
|
11-18-2011, 08:29 AM
|
#3
|
Senior Member
Join Date: Dec 2010
Posts: 2,229
|
Quote:
Originally Posted by rthibodaux
I have an 321RLTS Jayco Eagle. What is the best bike rack for this unit. On the back carrier it only has one bar standing vertical and my ole mind is at withs end on what type of bike rack to use.
thanks.
|
I have the same trailer and factory bike carrier. We carry two bikes on the factory carrier. I secure the bikes with straps to the vertical post and to the front edge of the carrier. They are very secure. I am presently trying to find a cover for the two bikes, which is a daunting task. May have to make our own.
__________________
2019 Airstream Flying Cloud 27FB
2012 321RLTS Eagle (sold)
2011 F350 CC SB
|
|
|
11-18-2011, 08:58 AM
|
#4
|
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 527
|
Beef up the back with either 3" angle iron or 2" tube steel.
__________________
Regards,
JP
2007 20BH Jayco JayFlight
2009 F150 5.4L SCrew Cab XLT
|
|
|
11-18-2011, 09:06 AM
|
#5
|
Member
Join Date: Jan 2011
Posts: 83
|
Bike Rack
I have a 2010 365 BHS. I bought a bike rack and installed a receiver hitch on the bumper. The second time I used the rack, it caused the paint to come off of the bumper welds. The worst part was, the bouncing of the trailer caused the inside bike to knock 3 holes in the back of the camper. I filled the holes with fiberglass and installed a new sticker over the holes. I would not suggest using a bike rack. I just lay them down in the bed of the truck.
Camper 10
|
|
|
11-18-2011, 09:37 AM
|
#6
|
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 527
|
I beefed up the back with tube steel and welded a receiver to that tube steel. Those bumpers they put on are too thin to do anything except hold the dump hoses. Going down even the bumpiest of roads, my bikes and my generator don't budge a inch. It cost me about $30 in steel and about an hour of welding. I have my own stick welder but I can't imagine a welding shop or even a muffler shop would charge you more then $100 (if you supplied the receiver).
__________________
Regards,
JP
2007 20BH Jayco JayFlight
2009 F150 5.4L SCrew Cab XLT
|
|
|
11-20-2011, 06:28 PM
|
#7
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
I strap 2 adult bikes to the tray as mentioned above and have not had any issues. Putting two equal size bikes in opposite directions helps in securing them to the tray. I use 4 rachet straps just to be safe since I cannot see back there and it does shake a little.
For a cover maybe a moped or motor cycle cover will work over two bikes due to the girth of one of those covers. I usually just cover the seats with saran wrap and deal with the elements.
The post really does not come into play so much but I keep it up as a fail safe if they decide to shift in transit.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
11-20-2011, 08:41 PM
|
#8
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
I am using ratchet straps also. I am still playing around with a quick and easy way to secure our 2 bikes. They are steady back there but it takes a while to tie everything down.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
11-21-2011, 09:12 AM
|
#9
|
Senior Member
Join Date: Feb 2011
Location: Gilmer, Texas
Posts: 1,053
|
Quote:
Originally Posted by JPBeck
I beefed up the back with tube steel and welded a receiver to that tube steel.
|
Could some of Ya'll that have beefed up the bumpers post a photo of what was done?
|
|
|
11-24-2011, 11:09 AM
|
#10
|
Senior Member
Join Date: Nov 2009
Location: Kentucky
Posts: 134
|
I use the factory installed rack, with ratchet straps, and bungee cords. Every time I load them (2 Adult 1 Child) it is a problem. The hardest thing is getting the pedals to not hit the vertical bar, and each other. No easy way I have ever found to load bikes one these racks
__________________
2010 Jayco Eagle Super Lite 31.5 FBHS
08 Chevy 2500HD LTZ Duramax /CC/SB/4x4
|
|
|
11-24-2011, 05:28 PM
|
#11
|
Senior Member
Join Date: Apr 2011
Location: AZ, SSA (Squabbling States of America)
Posts: 1,432
|
Quote:
Originally Posted by glazier
I use the factory installed rack, with ratchet straps, and bungee cords. Every time I load them (2 Adult 1 Child) it is a problem. The hardest thing is getting the pedals to not hit the vertical bar, and each other. No easy way I have ever found to load bikes one these racks
|
Are you rolling them on or lifting them on? If lifting, do you raise the bar before you put on the bikes or afterward?
__________________
Jeannie
|
|
|
11-24-2011, 09:31 PM
|
#12
|
Senior Member
Join Date: Nov 2009
Location: Kentucky
Posts: 134
|
I have done it both ways. The easiest is to load the bikes then raise the bar. I have never found it easy to tie bikes down no matter what the rack. I load 3 bikes on the rack, and toss my son's small bike in the bed of the truck (much easier than strapping down).
__________________
2010 Jayco Eagle Super Lite 31.5 FBHS
08 Chevy 2500HD LTZ Duramax /CC/SB/4x4
|
|
|
11-25-2011, 06:25 AM
|
#13
|
Senior Member
Join Date: Apr 2011
Location: AZ, SSA (Squabbling States of America)
Posts: 1,432
|
Thanks. Good to know. A hitch receiver with a conventional bike carrier is sounding more and more attractive.
__________________
Jeannie
|
|
|
11-25-2011, 07:06 AM
|
#14
|
Senior Member
Join Date: Oct 2010
Location: Full Timing since December 2011
Posts: 311
|
Quote:
Originally Posted by Albertaguy
I would suggest putting a front bumper hitch on your truck. I had one on my 07 Dodge Ram and am now going to purchase a Curt front bumper hitch for my 2010 Dodge Ram from the Hitch Store who have great prices and free delivery.
|
I too thought of this option, but, I was concerned that it would restrict air-flow and affect headlamp performance...
__________________
2015 Seismic 4212 on order
2010.5 Dodge Ram 3500 MC CTD HD Dually (4.10 gears), Firestone Air-Bags, with a Superglide model 4400.
2012 Yamaha Zuma 125
|
|
|
11-25-2011, 08:43 AM
|
#15
|
Senior Member
Join Date: Oct 2009
Location: Calgary
Posts: 524
|
Quote:
Originally Posted by Shin Pond Hunter
I too thought of this option, but, I was concerned that it would restrict air-flow and affect headlamp performance...
|
Unless you put a cover on your bikes, you will not have a problem.
__________________
2007 Jayco Eagle 325BHS
2010 Dodge 3500 Laramie
Kipor 2000 Generator
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|