There are several products on the market to stabilize Fifth wheel campers. These products stop the back and forth and side to side movement. But they do not stop the "bounce". I purchased two scissors jacks and mounted one of them on the frame in front of the wheels on each side. After I get set up and my camper is level front to back and side to side, I then lower the two scissors jacks and snug them up tightly. I found that this eliminates about 95% of the bounce. I have an Eagle Premier 321 RLTS. I also used this system on my Pinnacle that was 40 feet long. Once again, almost all the bounce was eliminated.
Just passing this along to everyone. I'm sure that many of you have figured this out already, butfor those of you who have not, You might try this.
Happy "bounce free" camping![/QUOTE]
Did the same mod 2 years ago and it does make a considerable difference. I also did the JT Strongarms on the landing gear which also takes the wiggle out. There's pics under 365 BHS mods in the mods section if anyone is interested in seeing pictures for reference.
http://www.jaycoowners.com/showthrea...bhs-Mods/page2