Not the way it stands UNLESS you have that A / B block (left in the picture). If you don't have that A / B plate, you will need to add it. You need to insure that the coax from the outside to the existing cable/antenna switch is a straight run (no splitter). It should be but never know. If it is, then you'll need to install a plate similar to that A / B. Very simple. Disconnect the Cable in line from the back of the cable antenna switch. Connect it to the back of your new A / B plate to port A. The back of port B gets a new short line to the cable / antenna switch. For Cable use, connect a jumper from port A to port B on your new plate. For Satellite, disconnect the jumper and connect port A to Sat IN on your receiver.
Hope I didn't confuse it?
__________________
Karl - Southeast, NY
2020 377 RLBH
2018 Ram 3500 Mega Limited 6.7L Cummins w/ Aisin
|