Capture Plate/Super Glide Hitch

[ddiego]

I would like to use a super glide hitch (pullrite) on a Jayco HT fifthwheel. I have a choice to use a "quick connect" type king pin trailer plate or go with the "Universal type". Has anyone used either system and what are pros and cons.

[justman]

The newer type universal capture plate (with shims) wouldn't work for me. I bought my hitch used and the previous owner passed a universal capture plate to me. Unfortunately, it was too short front to back, so I had to purchase the one specifically for my pin box.

If you're going to buy one and planning on keeping the hitch for a while, but possibly trading the trailer, try out the universal. It works the same, but is adjustable if you buy a new trailer. Otherwise, you can't go wrong with the one specifically meant for your trailer. Both work the same. The universal capture plate takes a bit to adjust, but once it's adjusted, it's good for forever.

[cariboocreek]

The Pull rite website has a chart showing specifically which capture plate for particular king pins. If your king pin accepts both a quick connect and universal, then I would go quick connect. Easier install is probably the big plus. Keep in mind that some king pins, such as the Mooryde, only accept a specific capture plate.

[Drifter1959]

Check out the Demco Hijacker Autoslide. No capture plate needed for a standard pin box.