Front Door versus "Basement" Door - Alignment Problem

[WeylanBryant]

Greetings... We've found that the front door and the basement door are JUST too close together to have them both opening/closing at the same time. I've searched for a plastic "T" door holder, but the smallest I can find is 3½". If I could find one that is, say, 2", then I could have the "basement" door open and still open/close the front door. Anyone know where you can find "odd length" holders? I've seen 3½", 6", and 10", but nothing smaller!

[3'senough]

Had the same issue on mine. Buy a 6" for the door and use the stop over again. Make sure you are gentle with screws and re-seal them when you put it back on. I then re-used the 3" on the opposite aide basement door that has none. That 6" gives you the entry door locked open and the basement door open without interference. Camco fit the same screw holes FYI.

[taylorj]

I had the same problem with my 365 BHS. The dealer put the 6 inch holder on the door and the problem was solved. I emailed Jayco about the airflow problem in the bunkhouse and I will let you know the response.
Camper 10