Furnance problems

[MollyB2017]

Help! We have a 2017 North Point. Our furnace worked last night now will not come on. Can y'all tell s where to access the furnace?? And ideas on what may be going on?? TIA. MollyB2017

[Higgy]

there is usually a big air intake in front of where the furnace is, which should be removable. As for what could be wrong. Try checking fuses first. Then have a look at the connections to the furnace. When i first got mine it worked fine one day and wouldn't even start the next. All that had happened was a wire came off the terminals at the furnace. Two second fix. Could check if there is power to the furnace too if you have a multi meter. Then it narrows down the problem to a specific area.

[oldmanAZ]

Does your stove still light? When your thermostat setting calls for heat, does the furnace fan start blowing?

[Wayne70]

Originally Posted by MollyB2017

Help! We have a 2017 North Point. Our furnace worked last night now will not come on. Can y'all tell s where to access the furnace?? And ideas on what may be going on?? TIA. MollyB2017

I know this is an old chain but I had the same thing happen to me last night. Furnace was working then just stopped in the middle of the night. Propane is full and providing fuel to water heater and stove, fuses are fine, no other issues going on. Where you able to fix yours when it happen? What did you do?

[MadJoker TX]

Originally Posted by Wayne70

I know this is an old chain but I had the same thing happen to me last night. Furnace was working then just stopped in the middle of the night. Propane is full and providing fuel to water heater and stove, fuses are fine, no other issues going on. Where you able to fix yours when it happen? What did you do?

Check the reset switch on top of the furnace itself.

[wdw1210]

When pressing the reset, is the furnace turned on?

[Chopperdoc]

Same thing happened to me after I took it home from the dealership. Went thru the systems and furnace would not come on. I have the heat pump and the furnace is supposed to come on when there is a five degree difference between the temp and what you are calling for. Mine turned out to be the switch on top of the furnace. Its a PITA to get too but it worked fine after I reset it. FYI the switch faces from front of the RV to back. The front side needs to be in the down or in position. Its almost impossible to look at the switch to see the markings.