|
|
01-11-2016, 06:18 PM
|
#21
|
Senior Member
Join Date: Oct 2015
Location: Milford
Posts: 629
|
Quote:
Originally Posted by spepi
I didnt get the large wheels...I almost did, but after looking at my dads, there isnt much wheel well access with them. The 15's are fine. No camera or dual pane windows for me either. Julie is great. Hoping to see her at the camping show next weekend.
|
When I changed my 15" wheels out to 16" wheels, the tires were only 1" bigger diameter. It wouldn't change much clearance or access.
__________________
2016 Jayco Eagle HT 29.5BHDS (ordered 12/30/15, delivered 3/8/16)
2015 F-350 crew cab, short bed, 6.7L PSD, Pullrite Superglide 3300 hitch
|
|
|
03-23-2016, 07:46 AM
|
#22
|
Junior Member
Join Date: Mar 2016
Location: stockton
Posts: 20
|
Same rig I want.
Question for those who have the 29.5 BHDS.
Is there a plug in for coffee pot in the Outdoor kitchen area..?
I just looked at one but did not notice if it had an outlet our not....
|
|
|
03-23-2016, 07:51 AM
|
#23
|
Senior Member
Join Date: Feb 2016
Location: Rochester, MA
Posts: 491
|
Great rig, but even better knowing you have had good luck with Forrest RV, considering that's exactly where I ordered our 29.5BHDS from. Supposed to be off the Jayco line 13-April, woo hoo!
__________________
Tom
2017 F250 Lariat Super Duty Crew Cab, 4x4, 6.7L Power Stroke
2016 Jayco Eagle HT 29.5 BHDS
|
|
|
03-23-2016, 07:58 AM
|
#24
|
Senior Member
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
|
Good question. I just looked at the photos I took of mine when I picked it up, and there is no plug on the slide where the sink and stove are located. There is one behind the fridge. I bet it wouldn't be hard to run some wire into the next compartment and add a plug with the wires tied up so they move when you slide the counter out.
Great, now you added something else to my to-do list....
|
|
|
03-23-2016, 08:21 AM
|
#25
|
Senior Member
Join Date: Feb 2016
Location: Rochester, MA
Posts: 491
|
Quote:
Originally Posted by spepi
I bet it wouldn't be hard to run some wire into the next compartment and add a plug with the wires tied up so they move when you slide the counter out.
|
Good idea. Have you done any other mods to it yet?
__________________
Tom
2017 F250 Lariat Super Duty Crew Cab, 4x4, 6.7L Power Stroke
2016 Jayco Eagle HT 29.5 BHDS
|
|
|
03-23-2016, 08:23 AM
|
#26
|
Senior Member
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
|
just the thermostat. Its been kind of cold to really do anything. Im hoping Sunday this week me and the dw can get out there and get it loaded up. Hopefully heading to Aces High CG in RI in April
|
|
|
03-23-2016, 02:42 PM
|
#27
|
Senior Member
Join Date: Oct 2015
Location: Milford
Posts: 629
|
Quote:
Originally Posted by spepi
Good question. I just looked at the photos I took of mine when I picked it up, and there is no plug on the slide where the sink and stove are located. There is one behind the fridge. I bet it wouldn't be hard to run some wire into the next compartment and add a plug with the wires tied up so they move when you slide the counter out.
Great, now you added something else to my to-do list....
|
You are correct, no outlet in there.
I'm also thinking of doing exactly what you described.
__________________
2016 Jayco Eagle HT 29.5BHDS (ordered 12/30/15, delivered 3/8/16)
2015 F-350 crew cab, short bed, 6.7L PSD, Pullrite Superglide 3300 hitch
|
|
|
03-23-2016, 02:52 PM
|
#28
|
Member
Join Date: Oct 2015
Location: Canton
Posts: 41
|
I'm having the dealer (Forest) add a Maxxair vent cover to bedroom vent. I was told the bathroom vent has a new funky design and the Maxxair wont fit. Any one try to but a cover on yet?
|
|
|
03-23-2016, 05:48 PM
|
#29
|
Senior Member
Join Date: Oct 2015
Location: Milford
Posts: 629
|
Quote:
Originally Posted by FoxRed
I'm having the dealer (Forest) add a Maxxair vent cover to bedroom vent. I was told the bathroom vent has a new funky design and the Maxxair wont fit. Any one try to but a cover on yet?
|
I not sure a cover would do any good if it's like mine. It doesn't open like a regular one. Turning then handle opens some louvers on the sides that seem like they be protected.
__________________
2016 Jayco Eagle HT 29.5BHDS (ordered 12/30/15, delivered 3/8/16)
2015 F-350 crew cab, short bed, 6.7L PSD, Pullrite Superglide 3300 hitch
|
|
|
03-23-2016, 06:47 PM
|
#30
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,857
|
If the industry ever changes the design of the standard 14" roof vent they will be loads of aftermarket changes to roof vents.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
03-25-2016, 07:12 PM
|
#31
|
Member
Join Date: Oct 2015
Location: Canton
Posts: 41
|
Do you think the new louvered design is ok without the vent cover? I put covers over my vents for piece of mind and added protection.
|
|
|
03-26-2016, 07:30 AM
|
#32
|
Senior Member
Join Date: Oct 2015
Location: Milford
Posts: 629
|
Quote:
Originally Posted by FoxRed
Do you think the new louvered design is ok without the vent cover? I put covers over my vents for piece of mind and added protection.
|
Not sure yet. Next time it's raining, I'm going to go test it out!
I would guess it would do ok. Turning the handle to "close" it really doesn't seem like enough effort to really seal anything, so I expect that if it was going to leak, it would leak with it closed.
__________________
2016 Jayco Eagle HT 29.5BHDS (ordered 12/30/15, delivered 3/8/16)
2015 F-350 crew cab, short bed, 6.7L PSD, Pullrite Superglide 3300 hitch
|
|
|
03-26-2016, 08:13 AM
|
#33
|
Senior Member
Join Date: Aug 2015
Location: Mansfield, MA
Posts: 411
|
I dont think you can get the top of the vent cover off to even mount a cover.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|