It sounds to me like all of your jack legs are not in sync. Are you seeing any error message like 'LF Error' or 'RF Error' on the control panel? If so, then you need to do a reset. Lippert suggested the following steps to resync the jacks:
1. Make sure your rig is fully hitched to your TV and all legs retracted.
2. Using manual mode, extend each leg about 6 inches (use a ruler to be exact.)
3. Once all the legs are extended 6-inches, press and hold the "Retract" button, until all the legs fully retracted. Any error message on the screen should also disappear as well.
Hope this helps.
Quote:
Originally Posted by capt108
Need help
I have a Lippert 6 pt leveling system and after I drop the front jacks I have an issue getting the jacks to extend to get off of the hitch. The system cuts out and I have to reset it 3-4 times to get it high enough. Has anyone else ever experienced that of have a suggestion on what may be the issue?
Thanks
|