|
01-08-2017, 07:17 PM
|
#1
|
Senior Member
Join Date: Jan 2017
Location: Roswell
Posts: 119
|
Low Point Drain Valves - 377RLBH
Hi all, does anyone know exactly where the low point drain valves are located on a North Point 377RLBH?
I see the 'low point drain' sticker on the outside of the camper with the hot and cold water drains directly below (my old camper had caps on those lines and I would drain them right there). I'm reading that the drain valves should be inside the unit around the same spot the sticker is located on the outside. I've looked all over on the inside around that location and outside as well, no luck.
Thanks!
|
|
|
01-08-2017, 07:23 PM
|
#2
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
There's one under the dinning table slide for the fresh water tank and another under the kitchen slide for the fridge...this is all off the top of my head, as my 377 is at the dealer waiting on a new motor for the central vac.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
01-08-2017, 07:29 PM
|
#3
|
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 2,684
|
They are behind the wall in your storage compartment. Basically right above where you see them come out underneath. There should be a small access panel to unscrew.
__________________
2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
4 6volt 235ah Surrette batteries
2017 F-350 Platinum CC SRW
|
|
|
01-08-2017, 07:32 PM
|
#4
|
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 2,684
|
AND on a side note. I think everyone should take down the whole wall to see what's behind there. You should know what's there, where things are run, how they are run, and what makes the thing run.
You never know what you are going to need to know when you are using your rig.
__________________
2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
4 6volt 235ah Surrette batteries
2017 F-350 Platinum CC SRW
|
|
|
01-08-2017, 07:51 PM
|
#5
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
To make things easier, you can replace the screws with Velcro. Klassic is right...one should see what's going on "behind the scenes "
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
01-08-2017, 09:21 PM
|
#6
|
Senior Member
Join Date: Nov 2016
Location: Conrad
Posts: 108
|
I took several photos of behind the wall when i was dealing with the furnace switch issue. Figure it would be a good idea, and i got evidence of clamps dangling unattached.
Sent from my iPad using Tapatalk Pro
__________________
Wade F.
2015 F350 6.7 SWD
2016 North Point 377RLBH
2 Beautiful Redheads, 1 Great Pyrenees, 3 cats (1 is great, 1 is great but hides a lot, and 1 is a crabby old man)
Always looking for new places to take photos.
|
|
|
01-09-2017, 06:47 AM
|
#7
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,858
|
I leave one side of the panel missing a screw. It's easy to reach in the opening and pull the handles up. On the other side, same thing only they installed 1/4 turn valves.
Sent from my iPhone using Tapatalk
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|