|
03-23-2017, 08:58 PM
|
#1
|
Junior Member
Join Date: Mar 2017
Location: Where the job is
Posts: 21
|
Slide out help
I had trouble retracting the door side bunkhouse slide on a 2017 North Point 375bhfs I manually overrode it. Once I arrive at my destination, I tried to override it to extend it, and no luck. Any help would be much appreciated. Thank you in advance.
|
|
|
03-23-2017, 10:57 PM
|
#2
|
Senior Member
Join Date: Apr 2016
Location: SW Washington
Posts: 1,024
|
Your best source of information is directly from lippert. There website has a lot of good guides on it, albeit sometimes difficult to navigate. Especially if you are frustrated.
I was just on there looking up some information on the Schwintek slides myself.
The website is Lippert Components the leading OEM and Aftermarket RV Parts and Accessory Supplier
Which slide are you having trouble with on your unit. What lights are you getting on the controller?
__________________
2009 F350 CC LB 4WD
2017 Jayco 355MBQS
|
|
|
03-23-2017, 11:06 PM
|
#3
|
Junior Member
Join Date: Mar 2017
Location: Where the job is
Posts: 21
|
Im getting a red and green both flashing on the module. It is the door side bunkhouse slide, with the outdoor kitchen. Thank you
|
|
|
03-24-2017, 07:08 AM
|
#4
|
Senior Member
Join Date: Apr 2016
Location: SW Washington
Posts: 1,024
|
Quote:
Originally Posted by 5Castles
Im getting a red and green both flashing on the module. It is the door side bunkhouse slide, with the outdoor kitchen. Thank you
|
I can't really help you specifically, but If I recall the green light will flash to indicate which motor (either 1 or 2 blinks) and the red light will flash a number of times to indicate the error. There is a label on the top of the controller with the error counts.
Let us know what you find out.
__________________
2009 F350 CC LB 4WD
2017 Jayco 355MBQS
|
|
|
03-24-2017, 07:51 AM
|
#5
|
Senior Member
Join Date: Oct 2016
Location: Saint Thomas, PA
Posts: 2,234
|
The lights are for trouble codes. Go in Lippert support site and pull up their troubleshooting guide to understand how to read and interpret the codes. Also it will tell you how to over ride it and how to manually open and close it as well. Lots of cool reading on their support pages. Also there are YouTube videos as well.
Earl
|
|
|
03-24-2017, 07:55 AM
|
#6
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
Quote:
Originally Posted by Mopar_Earl
The lights are for trouble codes. Go in Lippert support site and pull up their troubleshooting guide to understand how to read and interpret the codes. Also it will tell you how to over ride it and how to manually open and close it as well. Lots of cool reading on their support pages. Also there are YouTube videos as well.
Earl
|
As stated above the number of flashes tells you the error. Count and read the chart on the module to give you the issue. I had a wire tear on one of the BH slides 2 years ago.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
03-24-2017, 11:27 AM
|
#7
|
Senior Member
Join Date: Dec 2015
Location: Arizona
Posts: 2,324
|
Check U Tube also are several good videos from Lippert!Lippert tech support 574-537-8900!
|
|
|
03-24-2017, 03:50 PM
|
#8
|
Junior Member
Join Date: Mar 2017
Location: Where the job is
Posts: 21
|
Thank you guys!! I unpluged the relay at the fuse panel, plugged it back in and that reset the module. I was able to extend the slide all the way out. Now the residential fridge only runs off of the inverter. Any more ideas lol
|
|
|
03-24-2017, 04:31 PM
|
#9
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,102
|
Quote:
Originally Posted by 5Castles
Now the residential fridge only runs off of the inverter. Any more ideas lol
|
Sounds like a tripped breaker or GFI.
|
|
|
03-24-2017, 04:36 PM
|
#10
|
Junior Member
Join Date: Mar 2017
Location: Where the job is
Posts: 21
|
I tried the GFCI, fuses, breaker and to no luck so far
|
|
|
03-24-2017, 04:56 PM
|
#11
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,102
|
There is also a reset on the side of the inverter, give that a try.
__________________
DISNEY LOVERS
|
|
|
03-24-2017, 05:22 PM
|
#12
|
Junior Member
Join Date: Mar 2017
Location: Where the job is
Posts: 21
|
I located a black button on the side of the inverter,only button I found on the inverter. It was not tripped. Is that the one I was looking for or did I miss it?
|
|
|
03-24-2017, 05:42 PM
|
#13
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,102
|
Did you push it? Don't think it actually looks tripped.
__________________
DISNEY LOVERS
|
|
|
03-24-2017, 05:54 PM
|
#14
|
Junior Member
Join Date: Mar 2017
Location: Where the job is
Posts: 21
|
Yes I went ahead and pushed it, just incase.
|
|
|
03-24-2017, 06:16 PM
|
#15
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,102
|
Do all your other outlets work?
If it works with the inverter on there are 4 possible issues. Tripped breaker, tripped GFI, loose wire going to the ac in side of inverter or bad internal transfer switch in inverter.
__________________
DISNEY LOVERS
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|