Slideout electrical problem?

[LegalEagle]

I have taken my new 323LKTS out for the first short trip, and encountered something with the slideout I wanted to know if any of you have experienced. It is the dinette and chair slide on the door side of the fifth wheel. It slides out without any delay. But when sliding in it will move a few inches, then I hear a click in the inverter. The slide stops until I release the switch, then it clicks again. The slide then moves but only for a few inches, when I hear the click again and it stops until I release the switch and it clicks. The slide eventually gets all the way in, but it takes a while going through the process. I will contact the dealer today for a warranty check, but wanted to know if any of you have the same problem. Thanks

[3'senough]

Sounds like the circut breaker is tripping. Are these Schwintek or rails under the slide? I had that issue on the rail slides with a binding issue that had to be adjusted on a unit. Sometimes your slide will shift slightly and need to be centered. Usually this is a one time adjustment.

Dealer should resolve without a problem.