TV Not Working

richie t · 08-07-2016, 07:06 AM

Have an Eagle HT 28.5 RSTS and tv doesn't work when I have it plugged into my house current. Had a X23B previously and the tv worked on house current. Any reason why this is happening?

rthibodaux · 08-07-2016, 07:32 PM

check GFCI

Wrascal · 08-07-2016, 08:39 PM

Oftentimes I wish there was a standard way to identify the difference between the abbreviations tv/TV; we've got both "television" and "tow vehicle" often being inter-mingled.

One should always be listed in CAPS and the other only in "lower case". If I was King for the day, month, or year: I would decree TV means tow vehicle, and tv means television.

15 lashes with a wet noodle for the first offense, 1 lash with leather for the second. Big Bertha has her way for subsequent offenses.

ArcticFire · 08-07-2016, 09:18 PM

Do any of the other 120v outlets work ?

Quote:

Originally Posted by richie t

Have an Eagle HT 28.5 RSTS and tv doesn't work when I have it plugged into my house current. Had a X23B previously and the tv worked on house current. Any reason why this is happening?

richie t · 08-10-2016, 09:31 AM

You're a genius! It was the GFI. Now the tv is working, but can't seem to coordinate the tv and dvd player. Have sound but no picture. Thanks again!

ArcticFire · 08-10-2016, 10:24 AM

Depending on how your tv and dvd player are connected ...... red and white are for audio left and right and yellow is for video.

Quote:

Originally Posted by richie t

You're a genius! It was the GFI. Now the tv is working, but can't seem to coordinate the tv and dvd player. Have sound but no picture. Thanks again!

richie t · 08-10-2016, 11:32 AM

I believe you are correct. From the dvd player to the tv there are only a red and white connections, no yellow. However the dvd player is installed, and I can't figure out a way to attach the yellow cord because I can't get behind the player to install it.

richie t · 08-10-2016, 02:01 PM

E-mailed Furrion, and explained my dilemma. They called me and said you have to remove the plastic face plate around the player and remove the screws, which I did. I then connectrd the red,white, and yellow wires from the dvd player to the tv, and it worked. Thanks again! P.S. You would have thought they would have connected it at the Jayco factory.

You may also like: