Hi I am new to the forum and it seems like there are a lot of knowledgeable people here. I have already learned a few good tips! Has anyone ever removed the under belly cover on a Fifth wheel. I have a 2006 325BHS and I have a sag in one area and I want to get a look underneath the trailer. Thanks in advance for your response and I look forward to sharing with you all.
Yes I was thiniking the same thing...Maybe drill a 1/8 inch hole at the sag to see if there is any water first.
Mine is sagging all over but I used an ice pick and punched some holes and found no water. Looks like they sorta wrapped it around external pipes and what not and didn't really make proper cut/fits. Then they filled the excess with spray foam. I have been in the fiver since October and I am going to take it in for some warranty issues when i get back to WV.
2011 Dodge 3500 DRW CC
2015 Open Range JT337RLS
I removed a section on my 5th wheel to replace a valve on the black water tank last year. Putting the cover back on was not easy. Hard time lining up screws with original holes. And there were a lot of screws. No clue on what the sag is, but I would suggest following the advice of the folks above. Good Luck