Originally Posted by stugie
No I don't at this time ,but I will try to find part #s for You.
First thing You will also need to do is check the struts that are currently on Your bed for following to made sure You are getting correct ones . 1. Measure length of strut fully extended from center of hole on each end of rod. 2. Look at side of strut to see what pound they are now should have #s on them. I believe they may be 80lbs now and they make 120 & 150 lbs.
The information on for My strut replacement :
1. strut length hole to hole extended is 20"
2. 150 lb. struts
Parts are JR Products part #GSNI-2300-150 ordered them from My local Jayco Dealer and cost Me $17.44 @ hope this helps Good Luck.