'06 31 BHDS Roof Repair - More HELP needed

[dcavaiani]

To rollback a portion of the TPO roof where the damage appears to be:

I was told "take of the end/corner strips"

I went up today to take a closer look and am wondering what the end strip actually is - if you mean the strip which appears to be just one piece from over the top corner all the down to the bottom on the camper? I only saw ONE screw head on the crowned middle strip right down by the bottom.

Also, I was told "Take the side strip screws out far enough back to where you need only"

I have no idea how to get AT the screws referred to - where to BEGIN - there are NO screw heads visible?

Also, does the gutter itself have to come off?

[Paintinfool3]

sometimes there is a plastic insert installed over the channel covering the screws and if the gutter is attached over the roof material then it would have to come off

[dcavaiani]

Originally Posted by Paintinfool3

sometimes there is a plastic insert installed over the channel covering the screws and if the gutter is attached over the roof material then it would have to come off

Yes, I see the plastic inserts - does it just snap back in? How do I remove the gutter? Do I just scrape off all the Dicor to find the screws or the ends of the plastic inserts to lift them up?