2016 27dsrl

[Jon Luc]

We have a 27dsrl ( new ) Has anyone had any problems with the booth
table that wobbles . It is a jayco white hawk. Its this years model. Any
help please. Jayco tells us that's the way they have been building them
for years. Don't think this should be a standard for a booth table.

Thanks
Jon Luc

[Davecarol]

I just got my 2017 white hawk 27 dsrl open and I have the 4 chairs and table was really not even anchored in. So took out the screws and installed new screws, be very careful as you do not want to go thru the floor. As if you do when you bring in the slide it will rip the floor.

[Nukeneck]

I have a white hawk 28dsbh with the same booth table. I had the same problem so I checked the screw tightness at the base and discovered every one of them loose. I actually removed all of the screws, spun the two post holders and placed new screws in new screw holes. This helped a lot but there's still a slight wobble. I checked the screws on the underside of the table which were also a bit loose so I tightened them. The design will not provide a 100% rigid table but tight screws/bolts do make a huge difference

[Cindi]

Our first tent trailer was a 1970s version with the same table set up that is in the booth of my 2016 27dsrl. It hasn't changed a bit... But I love the storage under the benches.

[jagster]

As a matter fact I found the table base loose in my 2017 27DSRL during the PDI. The Tech. tightened the screws and the the table is pretty stable. After what you said about the slide ripping the floor I'll keep an eye on that.

[Jon Luc]

Hello Jagster : Thanks for your info. I am going to check out your
info on Friday. I will try to tighten them and let you know

Jon Luc
Cedaredge, Co