314bhds slide adjustment

[Bleeb7204]

I recently got my 2015 eagle premier 314bhds travel trailer back from the last warranty work. Upon his return I noticed the decals on the front side of the slide were about 2 inches higher on the slide portion then on the side of the travel trailer. I opened my slide and it appeared there is a bracket on the bottom to adjust the slide up and down I don't know how this happened however when I brought it back they said they didn't touch it. I looked above the slide with it closed and noticed one end of the top seal was about an inch from the toof of the slide and the other end wad about 3 inches from the rubber roof of the slide. The bracket on the bottom of the slide appears to have two bolts with an adjustment bolt on the bottom. Can I simply loosen the two bolts in the bracket and loosen the adjustment bolt on the bottom of the bracket to lower the outside of the slide. Or is that not what i think it is on the bracket under the slide on the outside. Thanks for any assistance