33RLDS Wardrobe Slide out

[Roy W.]

I have a 2014 33RLDS and the wardrobe slideout does not appear to go out all the way at the top. When looking at it from the outside, it appears tipped. When running the slide out, I push on it on the top, but it still appears tipped and you can run your hand around the inside trim molding and there is a gap meaning it does not contact the seal when extended. It does however come in all the way and seals against the gaskets.........Any other 33RLDS owners experience this problem ??

[Idahoboy]

I have the same trailer. It kind of has a slight angle to it when it's out. We always have a couple of thing in it that puts a little weight at the bottom so it keeps the top tight. As far as going in, I make sure I use the rod that tightens it at the top and pulls it the rest of the way in so it can't leak.

[33 RLDS]

Originally Posted by Idahoboy

I have the same trailer. It kind of has a slight angle to it when it's out. We always have a couple of thing in it that puts a little weight at the bottom so it keeps the top tight. As far as going in, I make sure I use the rod that tightens it at the top and pulls it the rest of the way in so it can't leak.

What he said. Mine also is at an angle when its out and I also kinda help it go in by pulling on the top as it going in. I also use the included rod to keep it tight while traveling. On our 3rd season and no signs of any water intrusion.

Oh and I also don't run it completely out. I push the sliding bathroom door against it as it opens and stop when its flush with the slide as in no light shinning through. A hair more and its not flush.