I have a 2007 Jayco R30 with EZ Lube Hubs. After taking off the wheels, there is a dust cap with a small plug in the center. How do you inject the lube?
Thanks.
Mike
That small plug in the center of the dust cap is probably a grease zerk. Use a grease gun (available at auto supply stores) to pump grease into the hubs.
when greaseing, do you take the weight off the tires by jacking them up a little.i have heard to do this and rotate the tires while greasing , has any one else heard of this ?
when greasing, do you take the weight off the tires by jacking them up a little.i have heard to do this and rotate the tires while greasing , has any one else heard of this ?
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
The company who manufactures the hubs and axles. There should be an owners manual in your packet the dealer gave you.
Bud
Awwww, ok thanks!
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt