|
06-05-2016, 07:22 PM
|
#1
|
Member
Join Date: Apr 2016
Location: Central Jersey
Posts: 63
|
Grill to use with quick connect
So, new 23rb ordered April 10, waiting to find out arrival date. Did not order the bumper grill option, seemed a lot of people weren't fond of it and not worth the extra cost.
That said, anyone have recommendations on a table top grill that can be hooked up to the quick connect on the trailer? We have an awesome stainless table that we bring camping that will hold a table top set up, so just looking for the right grill to hook up to the quick connect.
__________________
2017 JayFlight 23RB
2007 Totoya Tundra Crew Cab 5.7L V8
Me, DH, DS (and sometimes 3 other DS's who have flown the coop!)
|
|
|
06-05-2016, 07:40 PM
|
#2
|
Senior Member
Join Date: Mar 2016
Location: Out west somewhere
Posts: 405
|
We have a Weber "Q" series BBQ. Had it for almost 10 years and love it. Haven't bothered figuring out how to connect to the quick connect on our new 321 yet though.
Grill is nice size, easy to clean and the side shelves fold nicely into the grill when closed up. They're rather spend your but really nice.
Enjoy your new camper!
|
|
|
06-05-2016, 07:50 PM
|
#3
|
Member
Join Date: Jul 2015
Location: SLC
Posts: 56
|
Grill to use with quick connect
I have a Weber Q1000. Got it a month or so after I got the trailer. Used the 1lb bottles with it for a season. This season, I purchased a quick connect hose and the fittings to convert the Q1000 to the quick connect. I purchased the hose and separate male Quick Connect barb on Amazon. I purchased a 1/4 to 1/8 brass connector and female to female brass connector from Lowes. Used it a few times this year and it's great. Really nice not to have to pack the 1lb bottles and cool to use the already onboard LP for cooking outside.
Sent from my iPhone using Tapatalk
__________________
2016 Jayflight 28BHBE Fiberglass/Elite
2014 F-150 4x4 Supercrew, Eco-Boost, Max Tow
|
|
|
06-05-2016, 08:02 PM
|
#4
|
Senior Member
Join Date: Jun 2014
Location: Northern CT
Posts: 223
|
I run a camp chef two burner stove off my quick connect. Had to do a few mods because the factory quick connect didn't match up with the aftermarket hose I had. It was pretty simple to buy a hose and coupler to replace the factory one and hook up any gas cooker from there. I have a post about how I did it for reference. Good luck!
__________________
2013 Jay Flight 26BH
2017 GMC Sierra 1500 SLT 4x4
|
|
|
06-05-2016, 08:11 PM
|
#5
|
Senior Member
Join Date: Mar 2016
Location: Out west somewhere
Posts: 405
|
Quote:
Originally Posted by pman1088
I have a Weber Q1000. Got it a month or so after I got the trailer. Used the 1lb bottles with it for a season. This season, I purchased a quick connect hose and the fittings to convert the Q1000 to the quick connect. I purchased the hose and separate male Quick Connect barb on Amazon. I purchased a 1/4 to 1/8 brass connector and female to female brass connector from Lowes. Used it a few times this year and it's great. Really nice not to have to pack the 1lb bottles and cool to use the already onboard LP for cooking outside.
Sent from my iPhone using Tapatalk
|
Guess I need to get the hose and fittings to replace the 1lb bottles. They're a bit of a pain to pack and haul around. Did the fittings from Lowes replace the Weber regulator?
Thanks
__________________
Me and my beautiful wife. Really close to retirement and can hardly wait!
2016 Eagle 321RSTS. MorRyde pin box. 12cu ft refer. Slide toppers and second awning.
2014 Silverado Duramax. Crew cab short box. Reese Titan 16K slider. Air bags.
|
|
|
06-05-2016, 08:21 PM
|
#6
|
Member
Join Date: Jul 2015
Location: SLC
Posts: 56
|
Quote:
Originally Posted by Camping Grandpa
Guess I need to get the hose and fittings to replace the 1lb bottles. They're a bit of a pain to pack and haul around. Did the fittings from Lowes replace the Weber regulator?
Thanks
|
The Weber has a 1/8 male NPT nipple that shows once their regulator is removed. I connected the 1/8 to 1/4 brass connector, leaving me with a male 1/4 brass NPT nipple. Then added the 1/4 female/female fitting, then the male quick connect. I did this to get the adapter out from the controls a little. The LP that comes out of the trailer connector is regulated by the trailer LP Regulator and seems to burn my food as good as before [emoji12].
When you are testing your connection, remember the Weber Q naturally had very low (short) visible flame coming from its burner bar.
I would post a picture, but my grill is in my trailer at the dealers for service.
Sent from my iPhone using Tapatalk
__________________
2016 Jayflight 28BHBE Fiberglass/Elite
2014 F-150 4x4 Supercrew, Eco-Boost, Max Tow
|
|
|
06-05-2016, 08:40 PM
|
#7
|
Senior Member
Join Date: Mar 2016
Location: Out west somewhere
Posts: 405
|
Quote:
Originally Posted by pman1088
The Weber has a 1/8 male NPT nipple that shows once their regulator is removed. I connected the 1/8 to 1/4 brass connector, leaving me with a male 1/4 brass NPT nipple. Then added the 1/4 female/female fitting, then the male quick connect. I did this to get the adapter out from the controls a little. The LP that comes out of the trailer connector is regulated by the trailer LP Regulator and seems to burn my food as good as before [emoji12].
When you are testing your connection, remember the Weber Q naturally had very low (short) visible flame coming from its burner bar.
I would post a picture, but my grill is in my trailer at the dealers for service.
Sent from my iPhone using Tapatalk
|
Thanks for the breakdown. I'll go buy the parts and get it done. Gotta take it apart and scare out the spider that built a web in there any way.
__________________
Me and my beautiful wife. Really close to retirement and can hardly wait!
2016 Eagle 321RSTS. MorRyde pin box. 12cu ft refer. Slide toppers and second awning.
2014 Silverado Duramax. Crew cab short box. Reese Titan 16K slider. Air bags.
|
|
|
06-05-2016, 08:48 PM
|
#8
|
Member
Join Date: Jul 2015
Location: SLC
Posts: 56
|
The parts from Amazon are:
Camco LP Hose
and
Male Quick Connect Adapter
These items were plug and play with the hoses/connection that came stock on my 2016 28BHBE. Don't forget the gas line pipe tape!
__________________
2016 Jayflight 28BHBE Fiberglass/Elite
2014 F-150 4x4 Supercrew, Eco-Boost, Max Tow
|
|
|
06-05-2016, 08:52 PM
|
#9
|
Senior Member
Join Date: Feb 2015
Location: Winnipeg
Posts: 942
|
I liked the mod to our Weber Q1000 so much, I went and did the same thing to a portable propane fire pit, and added a longer hose. It works great.
__________________
Geoff & Jill
& Sierra, the little white monster
2013 Ford F-150 XTR SC Ecoboost
2015 Jayco Jay Flight 24FBS
Winnipeg, Manitoba
|
|
|
06-06-2016, 04:14 AM
|
#10
|
Senior Member
Join Date: Sep 2015
Location: North Greenbush, NY
Posts: 752
|
I modified my Coleman Roadtrip grill and a smaller Coleman tabletop grill (no longer made) to both run from the low pressure connection. Bought the fittings to make a valved wye, as well, so that I can use both simultainiosly.
__________________
Be Safe, and Everyone Goes Home,
Rick
2014 RAM Laramie 2500 w/6.7L Cummins Diesel and Automated Safety Hitch
2016 377RLBH Jayco North Point
300W of Suntech Solar w/Rogue MPPT Controller & Xantrex 2000W PSW Inverter
|
|
|
06-06-2016, 05:26 AM
|
#11
|
Senior Member
Join Date: Feb 2012
Posts: 968
|
I've done the Coleman LXE mod for the quick connect.
But from everything I've read, the Weber is the much preferred grill for RVers. So if you haven't already purchased a grill, definitely look into the Weber.
We actually like our Coleman and don't seem to have the problems that some others associate with it (too hot, not easy to clean, can't put the lid down). We don't seem to have those problems and we like that it can be used as a grill, a griddle (for breakfast pancakes, eggs, etc) and a stove top (for brewing coffee, pot of beans, etc).
Here's the video for how to convert the LXE for low pressure quick connect:
Or if you want to buy it all pre-made, you can get it from here, although you can do it yourself for less than the $50 bucks that this place charges: http://propanegear.com/coleman-roadt...onversion-kit/
|
|
|
06-06-2016, 06:41 AM
|
#12
|
Member
Join Date: Apr 2016
Location: Central Jersey
Posts: 63
|
So, the hubby isn't handy at all. I usually am, I am an engineer, but the chemical type, don't usually play with gas lines or electricity.
Anyone know of a grill that will work without modification? If not, I can get my handy baby brother to help with the mod.
__________________
2017 JayFlight 23RB
2007 Totoya Tundra Crew Cab 5.7L V8
Me, DH, DS (and sometimes 3 other DS's who have flown the coop!)
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|