Info panel

[sharynmahanna]

. We are plugged into electricity so why isnt this lighting up?

[fochman]

You have to push the white buttons ( Batt Fresh Grey Black) on the panel to get the readings to light up.

[jcoyle]

What would you like to light up? The switches should light up as you turn them on. The indicator lights should light up as the buttons are pushed for each system to show the level in the corresponding tank/batteries.

[BrentB]

Since as you stated in another thread, you are having problems with your water heater, you have probably blown the fuse for the monitor as well. Replace the 15 amp fuse that protects the Monitor Panel/Holding Tanks/Water Pump/Water Heater/Sink Lights and you should be back in business. Make sure the water heater is turned off first.

[sharynmahanna]

Ty that makes sense.


Sent from my iPhone using Tapatalk

[SouthCo]

Originally Posted by fochman

You have to push the white buttons ( Batt Fresh Grey Black) on the panel to get the readings to light up.

X2. The level indicators only light up when you push the corresponding buttons. Now the lights next to the switches should light up when they are turned on.

OP, you don't specify what ones your talking about and whether you have pushed the buttons and/or turned the switches on....