Originally Posted by TommyAjax
We have ordered a 2016 26BH and I am planning on buying an Equal-i-zer hitch from a different dealer. I am trying to prep in advance of picking it up and want to get the hitch setup as much as possible before the PDI so that we can just go if everything is okay.
So is there anyone out there that can tell me what ball size I need, and the approximate height of the trailer hitch so that I can get the truck side at about the same level.
If I can get that info, then all that I have to do is install the trailer side brackets when I pick it up...
It all depends. You have to get your new trailer on level ground and measure to the top of the coupler. Jayco is mounting the coupler on the top or bottom of the A frame. Unfortunately you are going have to adjust the head when you pick up the TT. The dealer should do it for you.
Like old blue said, the ball is 2-5/16".
2015 Jayco 24FBS Elite Jay Flight
2013 Chevrolet Silverado 2500HD 4X4 6.0L 3.73 Axle
HD Trailering Package with Integrated Brake Controller
Equal-i-zer Hitch 10k/1000