Jay Flight TV Mounts?

[USCooper]

Aloha!

Have you guys found a good Amazon bracket for a 32" TV that works well?

These TVs weigh nothing these days but still would like to have a quick release of some sort to stow then going doing the road. Some sort or articulation to tilt side to side would be great. Most importantly, I want to make sure the screws are secure and what the right length is to not go through the wall.

I figured some of you fine folks here have already figured this out

2017 28RLS for reference.

[Doug]

Look through this thread
http://www.jaycoowners.com/forums/f3...unt-44391.html

[USCooper]

Originally Posted by Doug

Look through this thread
http://www.jaycoowners.com/forums/f3...unt-44391.html

Thanks Doug. I had checked out that thread but that Camping World model is out of stock online right now. Also still wondering what size alternate screws to use if I picked up a regular cheap "home-use" model.

[Doug]

I've seen 5/8" to 3/4"
Can't remember all the threads.

http://www.jaycoowners.com/forums/f3...unt-44391.html

I would say 5/8" is what I am going to try.

D.

[USCooper]

Originally Posted by Doug

I've seen 5/8" to 3/4"
Can't remember all the threads.

http://www.jaycoowners.com/forums/f3...unt-44391.html

I would say 5/8" is what I am going to try.

D.

Great, thanks!

[tbwill]

Check out the Snap-In mounts from Mor-Ryde TV Mounts - MORryde They have rigid, swivel and extendable mounts that allow you to readily remove or install the TV. I am going to use one of the rigid ones for a TV for our bedroom, so that when traveling I can lay the TV on the bed and not have it bouncing around on the wall.

[Woodworker]

Try Sams Club or Best Buy

Sent from my SM-G900V using Tapatalk

[reeses]

This may help you.

[AZTURBO93]

Hi,

We just purchased a Jayco 236TH and it has two TV mounts. One in the bedroom and one outside.

How is a person laying in bed going to see a flat mounted TV on the adjacent wall? The mount doesn't swivel or tilt at all.

Secondly, what TV actually fits that TV mount? The $108 32-inch TV from Walmart doesn't match the bolt pattern at all for that mount.

Was this a gimmick from Jayco and nothing works or am I missing something?

[mokurt]

Originally Posted by AZTURBO93

Hi,

We just purchased a Jayco 236TH and it has two TV mounts. One in the bedroom and one outside.

How is a person laying in bed going to see a flat mounted TV on the adjacent wall? The mount doesn't swivel or tilt at all.

Secondly, what TV actually fits that TV mount? The $108 32-inch TV from Walmart doesn't match the bolt pattern at all for that mount.

Was this a gimmick from Jayco and nothing works or am I missing something?

When we bought our 248RSBW the sales person was pushing Furrion products.
Maybe the mount is for a Furrion TV ?

[Boooker]

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

We have this in our 195RB and it works great.

[Er1c]

Originally Posted by AZTURBO93

Hi,

We just purchased a Jayco 236TH and it has two TV mounts. One in the bedroom and one outside.

How is a person laying in bed going to see a flat mounted TV on the adjacent wall? The mount doesn't swivel or tilt at all.

Secondly, what TV actually fits that TV mount? The $108 32-inch TV from Walmart doesn't match the bolt pattern at all for that mount.

Was this a gimmick from Jayco and nothing works or am I missing something?

Ha! Just last week I added a TV to the bedroom of our 267BHS using that mount. I had to lower the mount because the (32") TV wouldn't fit due to the cable jack sticking out just above it on the ceiling.

I also needed an adapter in order to use the bracket with the TV.

We haven't tried watching it while mounted in the bedroom - there's no way it'd be comfortable. It's really only mounted there when it's not on the mount outside.

[Bike_pilot]

We bought an extra 32" Furrion TV and have that same bracket on our 2020 Jay Flight. It fits perfect. We move the TV from the bedroom to the outside mount.

[Marcm157]

You can also try Kebloc mounts. They have a really good mounting system that is very versatile. I mount my outside TV using one. Very easy to put up and take down.

[Bike_pilot]

Kebloc are the ones mounted in the bedroom and under the awning from the factory on my 2020 24rbs.

[jaycorob72]

hello I have a 2020 jayco jay flight 33rbts and I have the same problem with the bedroom tv mount. Did you ever find a mount that works?

[N Saban]

Samsung 42 inch fits that square outdoor bracket

[Roosevelt008]

We have a 267BHS with entertainment nook for TV. I didn't want to put holes in the backside bc wires ran down for the outlet, radio etc. I bought a shelf board from home Depot and attached it with little brackets to the trim pieces inside the corners of the nook. Then I attached a $9 flat wall onn brand mount to the shelf board. Works fantastic. We have a 32" onn smart tv on it. We don't remove for traveling, just tuck a throw blanket around it during travel. Here is link to shelf board and bracket. I have about $20 in it total....the RV stuff is too expensive Mor Ryde, Furrion, eKebloc. You can do it better and cheaper your self

https://www.homedepot.com/p/Rubberma...B&gclsrc=aw.ds

https://www.walmart.com/ip/onn-Fixed...B&gclsrc=aw.ds

[jpman]

I bought this one and we love it:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Also I put a different mount in the bedroom between the two doors. Fits perfectly and TV is easily removed for towing.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[Roosevelt008]

For our bedroom area we bought a little swivel mount from Wal Mart and mounted it to the existing Kebloc tv mount that came with our RV. Now we have a removable swivel mount and didn't have to drill any new holes in the wall. Just another idea....