We have a 2012 213x with a power rear slide bed. The last few times we had it out the bed doesn't slide out or in all the way and we have to hand crank it to setup or take in the remaining way (not to far just annoying). Motor doesn't sound bad. Any ideas on what the problem or fix might be?
We bought our 2011 X213 and in 2011 and at the time some of the slide motors being installed in the new X213s were under sized. We were lucking getting the more powerful version and have not had any problems. I don't remember if Jayco did a recall or just dealt with the problem on a case by case basis. I would contact Jayco.
I would definitely check your BATTERY setup. The battery adds more current capacity to the system even when you are plugged into shore power.
Next time you try it nose your truck up to the battery position and clip in your jumper cable...
This certainly helps my large trailer slide outs...
__________________ Roy and Carolyn
I claim Horse Creek Country in Southern Ill - Momabear is from North Texas
We live in King George VA RETIRED DOD DOAF DON CONTRACTOR Electronics Tech 42YRS
"We're burning daylight" - John Wayne
2008 STARCRAFT 14RT OFF-ROAD POPUP with PD9260C and three 85AH 12VDC batteries
2010 F150 FX4 5.4 GAS with 3.73 gears - Super Cab - Towing Package - 2KW Honda EU2000i Gen
K9PHT (since 1957) 146.52Mhz
"We always have a PLAN B"