Need help for measurement on a Jayfeather 25BH

[robert9999]

I need a measure for the length of the front skirt on the right hand side of the T.T. I'm in storage away from my home so I can't get to it this week. ( I will attach a picture of what I'm talking about.) They sell it by the foot cut to length.http://www.jaycoowners.com/forums/at...1&d=1488493757

[farnik78]

Tire is flat


Sent from my iPhone using Tapatalk

[robert9999]

Not my unit just a pic from the I net for reference.

[sennister]

Wish I could help but we don't do our PDI for another two weeks. We did get the license plate in the mail yesterday so it is getting close. We had to delay the PDI because I needed surgery and couldn't lift anything over 10 lbs for a month. That makes it hard to hitch up a trailer not to mention setting up the WD hitch. Also can't drive while on pain meds. This sitting at home has been driving me up the wall. Wish I could have picked it up before but then I would be out there setting things up and not recovering.

Sent from my Nexus 6P using Tapatalk

[bondo303]

84" to the front leading edge of the camper.

Sent from my SM-G920V using Tapatalk

[robert9999]

Bondo303 Thanks a lot you saved me a trip this weekend. really appreciate it.
BTW I am an ex L.I.'er lived there from 78-88 (Wheatley Heights, the good part) than moved to Fla.

[bondo303]

Originally Posted by robert9999

Bondo303 Thanks a lot you saved me a trip this weekend. really appreciate it.
BTW I am an ex L.I.'er lived there from 78-88 (Wheatley Heights, the good part) than moved to Fla.

Your welcome. I drive on Colonial Springs Rd everyday to and from work. I deliver there on occasion. I am a UPS driver in the area. I mostly deliver in dix hills, Deer Park and melville.

Sent from my SM-G920V using Tapatalk

[robert9999]

I was off Col sprgs rd on circle drive, small world huh?

[bondo303]

Originally Posted by robert9999

I was off Col sprgs rd on circle drive, small world huh?

Sure is [emoji106]

Sent from my SM-G920V using Tapatalk

[robert9999]

Got the piece delivered for total of $54.00. (shipping cost more than the piece) They had to enclose it in a wood frame box. I used the old piece to cut the angle at front & was able to remove & reuse the rubber edge covers on to the new piece. I lined up the holes & drilled new ones. Total time about an hour. Easy fix! Looks like new again

[bondo303]

Good job. Glad to see my measurement was accurate.

Sent from my SM-G920V using Tapatalk