Quote:
Originally Posted by jasonmiddlebrooks
It has been said before and I can confirm do not pull the pin and drop the front jacks to the ground all the way before you start. I like to leave about a 4" gap between the base and the ground on the front jacks.
|
That's what I've been doing as well but just saw this in the
Lippert Ground Control 3.0 (5th Wheel) 4 Point and 6 Point Owner's Manual:
Quote:
Unhitching from a Tow Vehicle
Note: Prior to unhitching from the tow vehicle, ensure unit is parked on a level surface and be sure to chock
the tires of the unit.
1. Extend the inner legs of both landing gear 4-5 inches by pulling on the quick release pins.
|
Leaving a 4 inch gap between the base and the ground has me dropping the inner legs about a foot. I'm going to try following instructions and see how that works.
Linear Mode
