I have 2011 26BH and the outside shower has no way near the pressure of the inside one or the faucets for that matter. Is anyone else have this problem or have any suggestions to fix my problem?
You could try taking off the shower head and see if there is something obstructing the line, head or one of the valves. Some people have found plastic and other debris from the factory in their lines.
I have a 2014 28DSBH and the water pressure is poor on the outside shower. This was a full hookup site where we used the inside faucets and bath shower just fine. My last TT also experienced this as well.
If you find a solution please post as I will likely follow.