Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-17-2011, 05:21 PM   #1
Member
 
Join Date: May 2010
Posts: 30
preferred method of leveling

I am putting my tt on seasonal site this year and it needs serious leveling. I was planning on using 5' pieces of 2*8 boards, but then I saw leveling blocks at Wal-Mart. What do you guys find works the best. Thanks.
__________________
2008 Toyota tundra 5.7l I-force V8
2009 Jayflight 26bh
jonathan28 is offline   Reply With Quote
Old 04-17-2011, 06:31 PM   #2
Senior Member
 
Join Date: Oct 2010
Posts: 414
At my seasonal site, I level side to side first - using 2x8 boards under its wheels. If one side needs to be higher, I use another 2x8 board (screw them together to stop board slippage). Once level side to side, I then level end to end - using a 2 ton bottle jack. If wondering, I do NOT lift the TT wheels off the ground. Might raise the TT approx 2-2.5" - to take approx 80% weight off its tires / leaf springs. And, I use auto jack stands spaced 6 ft apart down its frame rails. These axle stands are on thick patio stones. Due to trailer frame height, I'd use 12 ton jacks next time. Thus, creating more support area with less reach. Before buying 6 ton or 12 ton axle stands for your seasonal site TT, do measure the jack's reach. For picture of my TT's setup, surf: http://i178.photobucket.com/albums/w...e/100_0696.jpg

Hope this helps in your research....
Spike99 is offline   Reply With Quote
Old 04-17-2011, 11:05 PM   #3
Senior Member
 
Join Date: Dec 2010
Location: North Idaho/Arizona
Posts: 5,446
I carry 2x6 boards about 5ft long and a couple of 1x6 boards the same length. The Linex blocks come in handy some times too. Always do side to side and then front to back. I have found that with two slides on the same side that I need to add an extra inch because when the slides are out the springs on that side will sag more than the other side. I had to do that on our last trailer with just two slides on the street side of the trailer. For our summer site I plan to use two additional jacks just ahead of the axles to help firm things up a bit.
__________________
2011 Eagle 330RLTS with just about every option.
2017 Silverado 1500 4x4 5.3 with tow package. (no, we don't tow the Jayco with it.)
2018 Surveyor 265RLDS well equipped.
Life in the slow lane is still life.
clutch is offline   Reply With Quote
Old 07-20-2011, 09:10 PM   #4
Member
 
Join Date: Jul 2011
Posts: 44
Level side to side first then end to end. I use 2x6's. Also be careful not to lift to high (with your sizzor jacks or other jacks) because you then add the weight of the axles, wheels, and tires to frame and your side wall structure, causing stress on your walls. Fiberglass does not like a constant stress for any length of time or it WILL crack.
mhenry5144 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 10:27 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.