Propane Furnace and Boiler

[Penneca]

I own a 2016 Jayco 184bh. I had it stored over the winter and now when I hooked up the bottles and turned everything on the heater and furnace will not ignite.

I turned on the stove and the burners to purge the lines, they work fine, the fridge cuts in fine, but the furnace and hot water boiler will not light.

Is there a way to purge those lines.

[Marcm157]

Check for debris / obstructions in the burner tubes first. Could be something as small as a spider web or insects nesting in there. If they are clear, try cracking the supply lines open on each of them slightly.

[mike837go]

Also look for kinked hoses from the distribution block to the appliances.

You may have to power cycle or hit the reset button the get them to do a proper retry.