Question about a slide

[mwest75]

I have a question about our single slide. I have a 2014 25RKS Jay Flight. The slide seems to angle down slightly. Although not a huge deal it causes the table to be unlevel as well as the cabinet where the TV sets.

Is there a way to level the slide?

It slides in and out without a problem. It may need to be this way in order for the water to drain. In this case I should just get past it and move on.


Thanks

[Donedroolin]

Sounds like it needs to go back to the dealer for an adjustment. I have two slides and they don't lean like that

[turbo-power]

Does the slide seal properly when in the extended and retracted positions , can you see daylight anywhere around seals , any abnormal gaps in either position ? If not might be better to leave it alone. If so have it checked.

I have two slides on my 2013 and one of them has been adjusted twice and had some parts replaced and it is not any better its worse although it could be my dealer but I now wish I hadn't taken it in for them to adjust/repair. JMHO

[Redhorse 823]

+1 have the dealer check it out.
Or go by the dealer out one they have on display...

GL