|
11-02-2016, 05:55 AM
|
#1
|
Member
Join Date: Oct 2015
Location: Mesquite
Posts: 40
|
Radio antenna mast
I purchased a cover for my X23B. While examining the radio antenna, I noticed there is no set screw to remove the antenna. It is on a spring. Is it safe to lay the antenna down when installing the cover?
|
|
|
11-02-2016, 06:49 AM
|
#2
|
Senior Member
Join Date: Mar 2015
Location: Abingdon
Posts: 6,177
|
Yeah, that's what I do and it hasn't hurt anything.
__________________
2013 Jayco Eagle 328 RLTS
2021 Keystone Montana 3121RL
2013 F350 6.7L 4x4 CCLB
W/Air Lift air bags (front & rear)
Equal-I-Zer™ WDH & B&W Companion
|
|
|
11-02-2016, 06:51 AM
|
#3
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
There's a Philips screw on the side. Loosen it and allow the mast + spring to lay on the roof.
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
11-02-2016, 09:39 AM
|
#4
|
Senior Member
Join Date: Feb 2014
Location: MD
Posts: 3,856
|
Quote:
Originally Posted by rdcox
I purchased a cover for my X23B. While examining the radio antenna, I noticed there is no set screw to remove the antenna. It is on a spring. Is it safe to lay the antenna down when installing the cover?
|
Like Mike said there is a screw. I took mine off last night. When I put the ladder beside the camper, the screw was on the opposite side of where I was.
__________________
2017 JayFlight 28BHBE
2014 JayFlight Swift 264BH (Sold)
2007 GMC 2500 Sierra Classic Crew Cab LBZ Duramax / 6spd Allison
|
|
|
11-02-2016, 09:49 AM
|
#5
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Quote:
Originally Posted by SouthCo
Like Mike said there is a screw. I took mine off last night. When I put the ladder beside the camper, the screw was on the opposite side of where I was.
|
Then I must consider myself lucky! The screw on my TT faces the place where you have to put the ladder.
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
11-02-2016, 12:52 PM
|
#6
|
Senior Member
Join Date: Jun 2016
Location: Kennesaw
Posts: 172
|
My radio antenna was always in the way of my TV antenna so I loosened the screw and laid it on it's side a long time ago. We never use the Radio now that I installed a dock for my Onyx XM receiver anyway.
|
|
|
11-02-2016, 02:00 PM
|
#7
|
Junior Member
Join Date: Oct 2016
Location: highland
Posts: 6
|
How/where do you route/mount your XM antenna?
|
|
|
11-02-2016, 05:45 PM
|
#8
|
Senior Member
Join Date: Feb 2014
Location: MD
Posts: 3,856
|
Quote:
Originally Posted by mike837go
Then I must consider myself lucky! The screw on my TT faces the place where you have to put the ladder.
|
Yes sir you are lucky. It's not bad reaching around to get to the screw but it'd have been nice to not have to...
__________________
2017 JayFlight 28BHBE
2014 JayFlight Swift 264BH (Sold)
2007 GMC 2500 Sierra Classic Crew Cab LBZ Duramax / 6spd Allison
|
|
|
11-02-2016, 07:50 PM
|
#9
|
Senior Member
Join Date: Aug 2013
Location: Bellingham,Wa.
Posts: 6,680
|
Quote:
Originally Posted by mike837go
Then I must consider myself lucky! The screw on my TT faces the place where you have to put the ladder.
|
X2
__________________
2010 Jayco Hybrid EXP21M
2013 Toureg TDI
|
|
|
11-03-2016, 09:36 AM
|
#10
|
Senior Member
Join Date: Jun 2016
Location: Kennesaw
Posts: 172
|
Quote:
Originally Posted by strippedthread
How/where do you route/mount your XM antenna?
|
I mounted the docking station in the entertainment unit (which on the 28RLS backs up to the bathroom), then I drilled a hole up from the entertainment unit into the ceiling. I fished the antenna cable thru the roof from the Bathroom ceiling vent to the entertainment unit and stuck the antenna up in the bathroom vent. It was the car mount antenna and it's magnetic so it sticks to the metal frame of the vent. I left some extra wire at the vent end so if it's being really finicky I can put it out the top of the vent and move it around up on the roof till I get a good signal.
|
|
|
11-03-2016, 09:51 AM
|
#11
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Quote:
Originally Posted by SouthCo
Yes sir you are lucky. It's not bad reaching around to get to the screw but it'd have been nice to not have to...
|
No problem, then. Just undo the 3 self-tapping screws holding the base to the roof. Rotate the antenna 180* and screw it back down.
No big deal. AmIright?
Oh, that "roof leak" thing.... Uh, yeah.
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
11-03-2016, 10:25 AM
|
#12
|
Site Team
Join Date: Apr 2012
Location: Newark, NY
Posts: 15,916
|
So...now I've been thinkin' (you knew this might happen) about this whole dilemma, and it seems to me that if you only rotated it 120*, you could use the same three screw holes, eliminating about 50% of the leak thing. Now, the next question is, if the OP is left handed, he could turn the antenna counterclockwise. Or right handed, clockwise, putting said screw at the most convenient orientation. They shoulda used four screw holes, and then I woulda kept quiet!
__________________
Moderator
Think you're too old to cry or swear out loud...walk into your hitch in the dark.
2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
|
|
|
11-03-2016, 11:01 AM
|
#13
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Quote:
Originally Posted by JFlightRisk
So...now I've been thinkin' (you knew this might happen) about this whole dilemma, and it seems to me that if you only rotated it 120*, you could use the same three screw holes, eliminating about 50% of the leak thing. Now, the next question is, if the OP is left handed, he could turn the antenna counterclockwise. Or right handed, clockwise, putting said screw at the most convenient orientation. They shoulda used four screw holes, and then I woulda kept quiet!
|
Great minds think alike!
I considered 120 rotation. But I figured 180 was less rational and therefore funnier.
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
11-03-2016, 11:48 AM
|
#14
|
Site Team
Join Date: Apr 2012
Location: Newark, NY
Posts: 15,916
|
Quote:
Originally Posted by mike837go
Great minds think alike!
I considered 120 rotation. But I figured 180 was less rational and therefore funnier.
|
You got that right!
__________________
Moderator
Think you're too old to cry or swear out loud...walk into your hitch in the dark.
2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
|
|
|
11-03-2016, 12:02 PM
|
#15
|
Senior Member
Join Date: May 2015
Location: Campbell Hall
Posts: 2,835
|
Quote:
Originally Posted by JFlightRisk
You got that right!
|
Of course I'm right. I may have my faults, but being wrong isn't one of them.
Oh, excuse me. I was wrong once. I thought I made a mistake. But I was wrong.
[Rim shot]
I'm here all week, folks. Try the pot roast.
__________________
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck
Sitting in The Cheap Seats.
And proud of it!
|
|
|
11-03-2016, 02:16 PM
|
#16
|
Site Team
Join Date: Apr 2012
Location: Newark, NY
Posts: 15,916
|
(blink).....I got nuthin'......
__________________
Moderator
Think you're too old to cry or swear out loud...walk into your hitch in the dark.
2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|