2013 White Hawk 26 DSRB --- Big problem with the table rocking fore and aft when you sit down to eat. Didn't want coffee in my lap so here's my fix.Works great no movement. Have a woodworking shop,so I used a scrap piece of hard maple 1 1/8"x2"x21" long--counterbored the holes to accept 1" #10 hex head sheet metal screws. Put the table and legs together, went under, held cleat up against table, marked where I wanted it,took table and legs away,applied two part Locktite 5 min. set epoxy to back of cleat,carefully positioned cleat on wall,then screwed to wall ever so gentally. Remember you"re screwing into 1/4" luan---you can't use a lot of pressure--- just enough to snug up the cleat. Let this sit overnight. I then applied two strips of heavy duty exterior grade velcro I found at Lowes,installed the table and legs. That did the trick,and the added bonus--- the wife is happy.