Sylvania uWave Model SR11092-B Rotating Platter Problem
The "gears" on the glass tray do not fully engage the gears on the motor shaft. The glass tray very easily comes off of the shaft when operating. It's as if the roller ring wheels are too big for the unit, and it raises the glass tray too high. If I take the roller ring out, the glass tray fully engages the shaft gear, but then I have no roller ring. I also have to wonder if there are supposed to be some shims that would raise the shaft drive gear a little bit.
I suspect that a previous owner my have replaced either the shaft gear, the glass tray, or the roller ring with an incorrect part.....or might have left out some shims.
Any thoughts / experience with this? Thanks much!
__________________
Tom in Virginia Beach, Va
2008 Jayco G2 25 RKS (At Hunting Club)
2013 Forest River Lite 2109S (at Home)
2004 F350 6.0L TD LOADED!
|