Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 07-13-2016, 04:45 PM   #1
Member
 
Join Date: Feb 2016
Location: Bradenton
Posts: 77
Table uneven

Our camper has wrap around dinette.
Jayco installed the table to far back. So only a child can sit along wall. And also the table leans to the back.
Don't want to take it to dealership for warranty.
So question is should we remove screws from floor to move table out? Husband doesn't want to screw new holes into carpeted floor. Or should we move brackets on table (won't be centered on table then).
How do you suggest making table more even? Adding wedges between table and mount on low side?
Thanks!
__________________

ParrishCamper is offline   Reply With Quote
Old 07-13-2016, 10:31 PM   #2
Member
 
Join Date: Apr 2014
Location: DFW
Posts: 69
Try rotating the table 180 degrees. Ours is offset to where we use it one way when little kids are sitting there and then rotate it for adults. I'm betting you have yours in wrong.

As far as leaning, I think it's the nature of the removable pedestal tables.
__________________

Jace817 is offline   Reply With Quote
Old 07-13-2016, 10:51 PM   #3
Senior Member
 
Join Date: Apr 2016
Location: SW Washington
Posts: 863
I think to properly give you an answer on how to tackle this a photo would help.

If this is one of the table tops that sits on top of the poles, I'd agree that it's probably easiest to move the location of the brackets on the bottom of the table.
__________________
2009 F350 CC LB 4WD
2017 Jayco 355MBQS
Rustysocket is online now   Reply With Quote
Old 07-14-2016, 04:29 AM   #4
Member
 
Join Date: Feb 2016
Location: Bradenton
Posts: 77
It is a pedistool table. We're camping this weekend so I'll take photos.
Table on one side has a more curved corner. That side matches the curve of the dinette. The other side has more of a rounded 90 degree. The 90 degree side I have facing front of table. More curved side facing rear.
Maybe the table bracket was installed with table in other direction.
The other issue is the table isn't same distance from rear of dinette. So the pedistool legs aren't even. I would think this can be compensated for when reposition bracket on table.
I know pictures are better than words. I'll upload some this weekend.
ParrishCamper is offline   Reply With Quote
Old 07-14-2016, 01:37 PM   #5
Senior Member
 
Join Date: Oct 2015
Location: Portland
Posts: 150
Quote:
Originally Posted by ParrishCamper View Post
Table on one side has a more curved corner. That side matches the curve of the dinette. The other side has more of a rounded 90 degree. The 90 degree side I have facing front of table. More curved side facing rear.
Sounds backwards. Jayco rounds the outside corners more than the inside ones.

Here's a picture from Jayco's web site:

__________________
2016 X213 ⇝ Eq10K ⇝ 2014 EcoBeast
Rootus is offline   Reply With Quote
Old 07-14-2016, 02:15 PM   #6
Senior Member
 
Join Date: May 2013
Location: SE Wisconsin
Posts: 1,949
Here's a thought. Remove the table entirely. Have one made out of some nice light wood like cedar and put folding legs on it. It'll be more durable, nicer to look at and can be taken outside if you need an extra table.

We did this with our table as we use it outside. The original one got wet and swelled up. Plus we didn't like the strange leg setup they had on it.

__________________

__________________
Chuck
2013 Jayco Jayfeather X20 E, 2008 GMC Sierra 1500 Crew Cab Z71 SLE
DocBrown is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 10:54 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.