Torque

[Soltice]

Love the site and the great advice
Question
what is the recommend Ft/lb rating to torque the TT tires to?
Have the wrench just need the number
Thanks

[Tunce the traveler]

Are they steel or aluminum and are they 13s, 14s, 15s.

[ROC-REQS]

Here's a snap shot of the Wheel Lug Nut Torque Chart from the 2015 Eagle Manual. It's some what of an eye chart.
It's displayed on page 4-7 of the manual.

It states for 12" & 13" rims - 50 - 75 ft/lbs
for 14" - 16" rims - 90 - 120 ft/lbs

Same values for steel, chrome or aluminum.

I typically set my torque wrench between 95 - 115 ft/lbs for my 6-lug 16" rims.

Hope this helps.

[Tunce the traveler]

How's this and do it in 3 stages.

[Soltice]

thank everyone

[Soltice]

15"s and steel I believe
now have the chart
thanks
learn something new.. would have though the backing off the lugs to be so often that it requires that insprction time table

[314BHDS]

Originally Posted by Tunce the traveler

How's this and do it in 3 stages.

Only needs to be done in 3 stages if the wheel was completely removed,if your just snugging up to check torque 1 time is enough and obviously check before each trip

[Tunce the traveler]

Originally Posted by 314BHDS

Only needs to be done in 3 stages if the wheel was completely removed,if your just snugging up to check torque 1 time is enough and obviously check before each trip

X2