Originally Posted by gcmontgomery
While ur at it.... The other white colored wire unit has 1 wire connected to an upper and lower conx on the same side and open connections to 2 leads on the other side. Can u explain which wire(s) should connect there??
If that is your a/b connector plate and no wires are connected on the back side, that is a problem. That is where your cable/satellite signal comes in from outside and if cable, feeds out from the bottom to your TVs. Sounds like someone has disconnected the hookups for some reason. If using satellite, you feed your receiver from the top (a portion) and from your receiver back to your TV via HDMI cable.