|
04-30-2015, 08:35 AM
|
#1
|
Junior Member
Join Date: Apr 2015
Location: mishawaka
Posts: 14
|
TV mount on 287bhsw
I'm struggling on how to install a TV mount in the open TV access location in our 287bhsw. The dealer said there is plywood there, but I just don't think there is. Now, I know there is an actual sticker in the bedroom that shows where to mount the TV..nothing like that where I want to mount the TV. Just wondering if I'm stuck removing the TV when traveling or if anyone has installed a mount there and if so, how? Thanks! This is my first ever trailer. I'm both intimidated and excited.
|
|
|
04-30-2015, 09:54 AM
|
#2
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
I have TVs at both locations, the one in the living area is standing on a stand which is held down by two screws , bedroom one is screwed into a wall stud, there is no plywood at either location, do not follow stickers, fell with your hand the wall, fairly easy to locate a stud, the stickers are offset , will post pictures later tonight, bedroom TV is on a swing arm, no problem at all while driving
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 10:05 AM
|
#3
|
Junior Member
Join Date: Apr 2015
Location: mishawaka
Posts: 14
|
Quote:
Originally Posted by Chata
I have TVs at both locations, the one in the living area is standing on a stand which is held down by two screws , bedroom one is screwed into a wall stud, there is no plywood at either location, do not follow stickers, fell with your hand the wall, fairly easy to locate a stud, the stickers are offset , will post pictures later tonight, bedroom TV is on a swing arm, no problem at all while driving
|
Thanks Chata. Screwing the TV stand in is a great idea.
I read your other thread on the 287bhsw mods and found it very informative. Don't be surprised if I ask for more of your advice.
|
|
|
04-30-2015, 10:12 AM
|
#4
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
Just last week , I have swapped the thermostat for a digital one and replaced the AC control board , the new board was around $70 , plus another $70 for the thermostat, now, I can control gas / electric heating and cooling with a digital thermostat, no more none stop running AC fan, if you interested, let me know, will give you the info what to get and how to do it
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 10:16 AM
|
#5
|
Senior Member
Join Date: Apr 2015
Location: Mason
Posts: 139
|
I'm interested Chata... would this work in a X213?
|
|
|
04-30-2015, 10:21 AM
|
#6
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
Depends on the AC model you have, give me the exact model number, will look it up for you, 287 bhsw has Colman Mach 3 , they make a control board for all these functions for this model
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 06:05 PM
|
#7
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
This is the one in the living area, can't open the slide more bc of a fence
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 06:07 PM
|
#8
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
Closer look
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 06:09 PM
|
#9
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
Bedroom one, notice how far it is from the sticker, there is a hallow wall behind the sticker
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 06:10 PM
|
#10
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
Transport position
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 06:14 PM
|
#11
|
Member
Join Date: Nov 2014
Location: Oakland
Posts: 61
|
The living area stand is an original stand that came with the TV,I've cut about an inch from the back side to fit it on the shelf , predrilled two holes and screwed it into the shelf , hope it helps
__________________
2013 Toyota Tundra 4.6 towing package -gone, Jay Flight slx BHSW
2016 Toyota Tundra 5.7 SR5, TRD
|
|
|
04-30-2015, 07:46 PM
|
#12
|
Senior Member
Join Date: Mar 2015
Location: Sylacauga, AL
Posts: 209
|
I mounted my tv in the living area with no problem. First confirmed plywood backing with stud finder. Had to buy shorter screws than came with the mount, of course, but no problems so far. Knock on wood. Only thing I did was add two eye hooks to strap a bungie across the front of TV to keep it from banging the slide while traveling. It's at dealer right now for warranty work. I'll post pics when I get it back.
__________________
2016 Jayflight 29 bhds
2015 Ford F-350 SRW
|
|
|
08-16-2017, 08:47 PM
|
#13
|
Junior Member
Join Date: Aug 2017
Location: Lake Forest
Posts: 1
|
Mounting TV Wall bracket in 2018 Jayco SLX 287bhsw?
We are going to mount a wall bracket for 24" LCD TV in front bedroom on the stud, under the connection plate and outlet. The lag bolts that came with the mount are about 3" long. Definitely too long for us to use for this wall What size bolts did others use? Not interested in mounting bracket on an additional surface mounted piece of wood.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|