|
|
02-04-2014, 09:31 PM
|
#1
|
Junior Member
Join Date: Jan 2012
Location: Western North Dakota
Posts: 16
|
Vinyl Flooring cracking
Has anyone dealt with their vinyl laminate cracking due to weather extremes (40 degrees one day and -40 below the next day). How do you fix the flooring? If I replace the laminate do I have to take out the sofa and sink areas? Looking for any advice or help. Thanks in advance.
Jim Fahy
__________________
2013 Toyota Tundra Double Cab TRD/SR5
2006 Chevy Silverado 1500/1997 Chevy Suburban 1500
2007 Jayco Jay Feather 26L
Friendship through Amateur radio - N0SJ
|
|
|
02-05-2014, 12:07 AM
|
#2
|
Senior Member
Join Date: Nov 2013
Location: Winnipeg, Manitoba
Posts: 106
|
I had this issue in our old 5er. I cut around the perimeter and laid new vinyl down. I also glued it completely, I was told that it won't happen again if I did that.
I can't say how it's holding up because we sold the trailer 3 weeks after I fixed it.
__________________
2010 Jayco Eagle 351RLSA
2011 Nissan Titan 4x4 (don't worry, I don't pull the Eagle with it!)
Currently shopping for a Silverado 3500 Duramax
Oh, and I have a tent... Somewhere around here....
|
|
|
02-05-2014, 06:48 AM
|
#3
|
Senior Member
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
|
I put a floating laminate floor in mine. Cut out all the vinyl.
|
|
|
02-15-2014, 07:11 PM
|
#4
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
We experienced extreme temp fluctuations last month and I didn't give it a thought. Today I went out to put something in the trailer and found my flooring split open like it was being gutted. Very interested in hearing any words of advice folks have to offer on how to replace.
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
02-15-2014, 07:53 PM
|
#5
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
Had to replace my entire vinyl flooring over 5 years ago do to moisture damage, and yes, the best way is to cut the old vinyl out around the inside perimeter (not under cabinets, walls, etc..)......, you may also have bring-up some of the carpeting and re-tac it over the new vinyl. Over the years Jayco has gone from gluing, not gluing, back to gluing the vinyl down. My replacement vinyl was not glued with the thinking it will allow for some movement for temp expansion/retraction. I haven't had any issues with splitting.
To hide the new vinyl perimeter cut edge at the cabinet bases, inside walls, etc., 1/4 round was used ....,
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
02-15-2014, 07:54 PM
|
#6
|
Senior Member
Join Date: Jan 2014
Location: Aurora CO
Posts: 2,334
|
I used a "pergo" like product that floats on-top of a very thin layer of plastic sheeting. The laminate was also very thin, like 5mm if I recall. It came in 6 inch x 5 foot lengths. It was a toung and grove fit, but it look several hours to cut each piece to fit to all the various turns and shapes, unlike a roll of vinyl that you cut to the perimeter as you go.
I did wind up going back around with a 1/4 round moulding to finish off the look
Several hours of work, but it was worth not worrying about it splitting again with the wild temp swings we have here in Colorado
__________________
Jim & Kim from Colorado
2014 Eagle 30.5 RLS
2015 Dodge 3500HD SRW 6.7L
Click on my profile for Mods and notes
|
|
|
02-15-2014, 08:15 PM
|
#7
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
Quote:
Originally Posted by walker06@bresnan.net
snip....... Today I went out to put something in the trailer and found my flooring split open like it was being gutted.....snip
|
Wow, walking in and seeing that would sure take the wind out of anybody's sails.
We have had some unusually wide temperature swings here in Michigan this winter as well..., checked my TT earlier today (weekly mouse trap inspection) and so far my floor is holding it's own.
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
02-15-2014, 09:02 PM
|
#8
|
Senior Member
Join Date: Aug 2010
Location: Phoenix, AZ
Posts: 389
|
I have a spit of a couple inches. Repaired easily with Liquid Nail Glue. I thought we dropped something on floor. Not the case.
A real eye opener for me.
__________________
Richard & Marilyn
2010 Ford F150, V8, 5.4 liter
2010 Jay Feather Sport 165
|
|
|
02-16-2014, 10:15 PM
|
#9
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
Quote:
Originally Posted by Rustic Eagle
"Wow, walking in and seeing that would sure take the wind out of anybody's sails."
Bob
|
The reason I went out there was to take the new inverter we've been talking about out to store it 'til Spring. You're right, the excitement of the new inverter wore right off when I saw the floor. Oh well, that is the nature of the beast. Just an opportunity to make it that much more our own. :-)
I like the pics you posted on your floor, good job, looks great. Thanks Bob,
Shawn
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
02-21-2014, 08:32 AM
|
#10
|
Junior Member
Join Date: Apr 2013
Location: Ohio
Posts: 17
|
My 26bh looks like someone took a box cutter and went from end to end, slicing it up. I am thinking about a laminate floor, just don't know if I'll have the time.
Has anyone contacted insurance about there floor yet? Just curious what their reply was
__________________
2008 JAYCO JAYFLIGHT 26BH
2010 SIERRA 1500 SLT 4x4 CREW CAB 5.3L
|
|
|
02-21-2014, 08:47 AM
|
#11
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
Quote:
Originally Posted by hoehn19
"My 26bh looks like someone took a box cutter and went from end to end, slicing it up. I am thinking about a laminate floor, just don't know if I'll have the time.
Has anyone contacted insurance about there floor yet? Just curious what their reply was"
|
We briefly thought of laminate, but with a slide didn't figure it would be thin enough. The first thing I thought of was the insurance, and the fact that we didn't renew it after the settled with us on a total from hail damage. You can barely notice the damage so we bought it back. We failed to re-insure with existing damage. Bonehead move on our part.
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
05-13-2014, 05:17 AM
|
#12
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
Split floor repaired
Insurance will not cover damage from extreme cold. Here are the pics of the new flooring. NOT a DIY project, I paid, but I really like the results.
http://www.jaycoowners.com/forums/album.php?albumid=476
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
05-14-2014, 06:31 AM
|
#13
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,726
|
Almost all RV manufactures perimeter glue the flooring down.. they say it is a weight saving issue BS it is cost.. and that is what causes the cracking.. When repalcing make sure they glue the entire floor..
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
05-14-2014, 09:38 PM
|
#14
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
Quote:
Originally Posted by Seann45
Almost all RV manufactures perimeter glue the flooring down.. they say it is a weight saving issue BS it is cost.. and that is what causes the cracking.. When repalcing make sure they glue the entire floor..
|
Hey there Seann 45
We glued the entire floor. My installer agreed with you.
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
05-14-2014, 11:30 PM
|
#15
|
Senior Member
Join Date: Mar 2013
Location: Planet Earth
Posts: 6,818
|
Nice job Big Sky....great match to the woodwork. Hope it lasts for you!
|
|
|
05-15-2014, 05:09 AM
|
#16
|
Senior Member
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
|
We just had a floor job that was covered by home owners insurance.. just a thought on another avenue to try.
|
|
|
06-03-2014, 01:38 PM
|
#17
|
Junior Member
Join Date: Feb 2014
Posts: 1
|
I had the same thing happen to mine. My insurance company won't cover it.
|
|
|
06-25-2014, 10:20 PM
|
#18
|
Junior Member
Join Date: Jun 2014
Location: Farmington Hills
Posts: 2
|
Yet another Jayco Flooring Rip
I ran into same problem on my a 2008 Jayco 28BHS trailer. While trailer was locked/stored for winter the vinyl floor ripped/cracked from front bed all the way to the back bathroom. When I contacted Jayco they gave standard response that they offer a two year limited warranty and defects in material and workmanship are not covered after that period. Based on number similar postings on owner forums, it's pretty obvious that this is a case of either improperly installing the flooring or selecting a product that isn't suitable for a trailer. It's a shame, I'm guessing if Jayco had spent $50 on higher quality flooring, I wouldn't be looking at an estimated $1500-$2000 repair bill to replace the floor.
|
|
|
06-25-2014, 10:30 PM
|
#19
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
Quote:
Originally Posted by VoigtRA
Based on number similar postings on owner forums, it's pretty obvious that this is a case of either improperly installing the flooring or selecting a product that isn't suitable for a trailer. It's a shame, I'm guessing if Jayco had spent $50 on higher quality flooring, I wouldn't be looking at an estimated $1500-$2000 repair bill to replace the floor.
|
I'm not so sure it can all be blamed on Jayco. I may be naïve, but I think they've been trying over the years to find the right combination of product and install method. Based on our installers advice, we chose glued down entirely with a fiberglass backed vinyl. Time will tell if he is smarter than Jayco. Our install was only $700.00, found the vinyl for $0.99/sq. ft. Be sure to find an honest private contractor and get a good rate on your product.
If you haven't already, check it out. We love it.
http://www.jaycoowners.com/forums/album.php?albumid=476
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
04-02-2015, 10:45 AM
|
#20
|
Junior Member
Join Date: Jan 2015
Location: Livonia
Posts: 7
|
We just discovered the exact same issue with a crack right inside the front door of our Jayflight 29 FBS. We purchased our trailer over this past winter and have not even had a chance to use it yet. Right now i slapped down a nice strip of duct tape to keep it from getting worse but I know with this being right inside the door this is a temporary and very ugly fix.
I have thought about putting in a thin wood laminate (this was going to be a project a couple years down the road but I guess it has moved up on the priority list). Does anyone have suggestions on what to use, I assume the floating tongue and groove type would be the easiest to install with a 1/4 round trim to hide the edges.
Any suggestions or recommendations?
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|