|
05-25-2015, 07:23 AM
|
#1
|
Junior Member
Join Date: May 2015
Location: Concord
Posts: 1
|
window seals
Hi. I have a 2000 Jayco Eagle. One of the black outside window seals has shrunk and not attached to the window frame. Where can I find replacement seals?
|
|
|
05-25-2015, 07:46 AM
|
#2
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Welcome to the forum.
Have you tried contacting Jayco? Even if they don't have the part, they may be able to direct you to their window suppliers.
Good luck.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
05-28-2015, 01:31 AM
|
#3
|
Junior Member
Join Date: Oct 2014
Location: Near Charlotte, NC
Posts: 26
|
Thanks for the info.
|
|
|
05-28-2015, 09:03 AM
|
#4
|
Senior Member
Join Date: Mar 2013
Location: Manning
Posts: 376
|
Window Seal
I don't believe Jayco sells or supplies repair parts directly to the owner. Go online and see what you can find. There are a lot of website that sell RV repair parts.
|
|
|
05-28-2015, 02:54 PM
|
#5
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,726
|
forget the foam seals.. use the putty... it lasts longer and is what a lot of dealerships use when they replace the foammies.
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
05-28-2015, 03:15 PM
|
#6
|
Member
Join Date: Feb 2015
Location: Calgary
Posts: 57
|
Use butyl tape. Most dealerships should probably carry it, or an autobody supply shop. It's used in windshields as well as on sailboats. Should never leak again and it's very easy to work with. Just pop the window out, clean off any old residue, put a strip of the tape along the perimeter of the window, and pop the old window back in. Screwing the new window in will compress the tape and possibly squeeze some out. clean it up and add some caulk if you really want to, but the butyl will do the job on it's own! Replaced all the window seals on our old trailer this way and never had them leak again.
That might be the putty Seann45 is referring too.
__________________
2015 Starcraft 26BHS
2014 GMC Sierra 1500 SLT
|
|
|
05-28-2015, 03:22 PM
|
#7
|
Senior Member
Join Date: Aug 2013
Location: Bellingham,Wa.
Posts: 6,676
|
Quote:
Originally Posted by Offspring22
Use butyl tape. Most dealerships should probably carry it, or an autobody supply shop. It's used in windshields as well as on sailboats. Should never leak again and it's very easy to work with. Just pop the window out, clean off any old residue, put a strip of the tape along the perimeter of the window, and pop the old window back in. Screwing the new window in will compress the tape and possibly squeeze some out. clean it up and add some caulk if you really want to, but the butyl will do the job on it's own! Replaced all the window seals on our old trailer this way and never had them leak again.
|
What he said!!!
__________________
2010 Jayco Hybrid EXP21M
2013 Toureg TDI
|
|
|
05-28-2015, 03:28 PM
|
#8
|
Junior Member
Join Date: Oct 2014
Location: Near Charlotte, NC
Posts: 26
|
It's a rubber seal. Not tape or plastic. Fits in a track and presses against the window.
|
|
|
05-30-2015, 08:28 AM
|
#9
|
Senior Member
Join Date: May 2013
Posts: 1,588
|
I have seen some guys replace their original seals with butyl tape and this is what I plan on doing eventually when my seals need attention. One thing I would like to add is that the clamping force of the screws alone isn't always enough to get a good compressed seal - I would use a clamp to compress, drive in your screws, and then remove the clamp.
|
|
|
05-30-2015, 06:37 PM
|
#10
|
Senior Member
Join Date: Aug 2011
Location: Missouri City, The Republic of Texas
Posts: 5,063
|
Quote:
Originally Posted by yardvarkers
It's a rubber seal. Not tape or plastic. Fits in a track and presses against the window.
|
I think what Yard is talking about is the rubber seal between the glass and aluminum frame. That's a tough one. I had a broken window and replaced it. I destroyed the old one trying to figure out if the glass could be removed. Maybe a pro knows how, I couldn't figure it out.
__________________
Cheers,
T_
2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
|
|
|
05-02-2022, 02:45 PM
|
#11
|
Junior Member
Join Date: Aug 2021
Location: Chilliwack
Posts: 3
|
Window seal
I have the same problem and It looks like Steele rubber mouldings has it but it's not cheap. Think we were fixing airplanes.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|