Jayco RV Owners Forum

Thread Tools Display Modes
Old 05-07-2014, 01:21 PM   #1
Junior Member
Join Date: May 2014
Location: Muncie,IN USA
Posts: 6
2014 Sport 10 awning

Our dealer didn't install the awning on our new 2014 Sport 10 when we bought it last week. We got home to discover that the poles were still shrink-wrapped inside the camper. Since the dealer is 1 1/2 hrs. away we want to know if we can install the poles ourselves. I've read the instruction manual carefully but it is little help. Can anyone give us instructions on how to do this? I know from a previous camper how the poles attach to the top of the camper and to the ground or the bottom of the camper, but the two halves (each containing 2 legs) aren't hooked together. There are, however, two short pieces (one with a 1/2" hole in the middle and the other with 4 screw-sized holes) that can slip into the larger halves joining them together. There are no corresponding holes in the leg-containing pieces for screwing the two halves together, and I don't want to go drilling holes if they aren't needed. Finally, assuming that the two halves are permanently attached together, are they attached to the fabric awning or removed every time we take the awning down.

Thanks for your help. The tech guy at the dealer was clueless and said he would have to contact Jayco. I guess they don't sell many pop-ups.

tlyon is offline   Reply With Quote
Old 05-07-2014, 06:40 PM   #2
Senior Member
emjayuu's Avatar
Join Date: Jun 2013
Posts: 260
Take a look at this video... Around the 33 minute mark. Actually.... Watch the whole video... You may get something out of it like I did. .


2013 Jayco Sport
Ontario, Canada
emjayuu is offline   Reply With Quote
Old 05-07-2014, 08:09 PM   #3
Junior Member
Join Date: May 2014
Location: Muncie,IN USA
Posts: 6
awning video

Thanks for the reply, but I have seen this video many times and the awning hardware shown is not similar to that included with the 2014 model we have.
tlyon is offline   Reply With Quote
Old 05-15-2014, 06:13 PM   #4
Junior Member
Join Date: May 2014
Location: Rochester
Posts: 1
Had a similar issue/question with our 1207 we got. I contacted Jayco and after some confusion they found an old manual which answered my question. The small bars fit into the rail joining them together. The four holes are for #8x1-1/4 self tapping screws. Those screws go straight through and drill through the rail and into the other small bar with the single hole. The single hole bar is for an optional screen room pole. Once that is complete the entire assembly attaches to the end of the awning in a similar way to how the bag attached to the camper.
siekhatch is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 08:31 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.