I would ask the vendor to measure the distance between the two frame rails in the bay the tank is mounted in, then measure yours (tank mounts in the frame section just aft of the axle). If the dimensions match it should fit (frame width is the same on both models). If the tank is a loose fit on his, you might just have him measure the tank and see if it will fit.
On our 1007 the pump was mounted in the cabinet just to the right of the galley, under the front U dinette. You will need to have a 12V connection there to power the pump, and there are a few new plumbing connections required.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
|