New on here but need help. Getting my 94 1208 ready for next weekend. Bought a new pigtail before a trip and all lights did not work. I thought just bad light bulbs and went on trip. Last weekend getting ready I have no lights. Checked voltage. Had voltage on wires coming out the back. Thought bad light assemblies. Bought new ones. Still cant get the lights to work properly. I cleaned ground point on shore connector. I guess I just need a GOOD schematic of the wiring on the camper. I looked at another site and it said that the wiring is different the a regular trailer. Need help. Anybody.. anybody...
On a popup the first thing that comes to mind is a switch that operates when the sink is flipped over or a connector near one of the top support poles.
__________________ Chuck - Sparta, TN
2012 Jay Flight 22FB, 2 x Honda EU2000i
2013 GMC Yukon XL Denali AWD
EDUCATION is what you get when you read the fine print.....
EXPERIENCE is what you get when you don't.
On a popup the first thing that comes to mind is a switch that operates when the sink is flipped over or a connector near one of the top support poles.
That switch only disconnects interior lights. Not exterior
__________________
2013 Jayco Sport
Ontario, Canada
That's what I'm thinking as well. I sent a request to Jayco requesting a wiring diagram as others have done on a different post. Hope it works. Fellow retired AF here also!